• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Criton and CSS Update

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
We are pleased to announce that Al's hard work on the first 2 Criton kits is complete and you can see the results and options on this forum.

Larger Picture Speaker Kit Builders Overview

Our speaker kits fit into 2 main categories but we are planning to add a third. Once a design has been completed the kit provides the drivers, the crossover components, wiring, etc. The V and Criton series work in the target Parts Express cabinets and this is the first category.

They also cover another category where the builder is free to build his/her own cabinets and the aspects of design like cabinet volume, driver spacing are assumed to be respected.

A third category, which we are working on, is to provide the cabinets with the driver holes cut as well as fully assembled crossovers, wiring harness, etc. This would require a minimum number of tools and not involve any solder or sawdust. The closest we've come to this is the WR.30 series where the baffles were included.

Shortly we will begin to introduce our new ML-TL series which require the builder to build the complete cabinet according to our design. We are grateful for the assistance of Scott Lindgren in the basic cabinet designs.

Bob
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.