• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

WR.30 speaker kit with Obbligato plus Dueland resistor build.

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
An externally hosted image should be here but it was not working when we last tested it.


WR.30 speaker kit build kit price is $480.00 plus the cost of the Parts Express cabinets I used the curved Piano black for this build.

CSS WR.30U7
WR.30 MTM Loudspeaker kit with upgraded caps, resistors, wire, damping pads and acoustic foam (Pair)
These kits use the WR125STR drivers with XBL plus the Wavecor TW030WA01 tweeter and are designed around the use of the Parts Express .50cf cabinets. If you build your own cabinets you could order the pre-finished PE grills. This kit adds Obbligato 630v caps, Duelund resistors, DH Labs Odyssey 14 gauge OFHC copper wire, acoustic foam and damping pads.


Upgraded crossovers assembled ready for wiring
An externally hosted image should be here but it was not working when we last tested it.



DH labs wire used for the internal wiring for the crossovers

An externally hosted image should be here but it was not working when we last tested it.


DH labs wire cut to size ready for connectors

An externally hosted image should be here but it was not working when we last tested it.


DH labs wires with connectors installed ready for connection to crossover boards.

An externally hosted image should be here but it was not working when we last tested it.


Crossover boards with DH labs ready for assembly

An externally hosted image should be here but it was not working when we last tested it.


WR.30 crossovers wired ready for installation into cabinets

An externally hosted image should be here but it was not working when we last tested it.


WR.30 speakers mounted to the CNC pre cut baffles ready for assembly.

An externally hosted image should be here but it was not working when we last tested it.


Install damper pads with heat gun to activate the glue.

An externally hosted image should be here but it was not working when we last tested it.


WR.30 crossovers installed with acoustic foam also installed

An externally hosted image should be here but it was not working when we last tested it.



Wired up drivers lowering the front onto the cabinet

An externally hosted image should be here but it was not working when we last tested it.



For this set I decided to change the front color of the baffle to a silver metal just a quick spray on in minutes nothing fancy.

An externally hosted image should be here but it was not working when we last tested it.


Breaking the WR.30 speakers in.

An externally hosted image should be here but it was not working when we last tested it.


The mess TL 3 way CSS, plus the MLTL is the VX.2 crossover parts on the sub box is for the 3way.....
 
Last edited by a moderator:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.