SDX10 + SEAS triamp build - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > CSS

CSS Creative Sound Solutions (CSS) is a service-oriented provider of high-value speaker components for the DIY loudspeaker builder

Reply
 
Thread Tools Search this Thread
Old 6th July 2013, 01:58 AM   #1
diyAudio Member
 
neutron7's Avatar
 
Join Date: Dec 2003
Location: Toronto Canada
Default SDX10 + SEAS triamp build

these guys sound great
SDX10 + seas

Click the image to open in full size.

SDX gets approx 200W from emotiva UPA200

the other speakers get 80W each from UPA500

center and rears provided during movies by reciever and some little polks

crossover is by miniDSP

I have heard things on a tune i made in 1999 which i have never heard despite listening on a lot of systems. a MIDI note is stuck at the beginning of the tune.
  Reply With Quote
Old 6th July 2013, 05:31 AM   #2
RAW is offline RAW  Canada
diyAudio Member
 
Join Date: Jul 2002
Location: British Columbia ,Canada
Nice looking system
  Reply With Quote
Old 6th July 2013, 12:31 PM   #3
CSS/XBL is offline CSS/XBL  Canada
diyAudio Member
 
Join Date: Oct 2003
Looks great!! How is the SDX10 loaded? Wish I had time to learn how to use the miniDSP. They showed some new stuff at CES in January but so far the samples promised have not been released.
  Reply With Quote
Old 6th July 2013, 04:12 PM   #4
diyAudio Member
 
neutron7's Avatar
 
Join Date: Dec 2003
Location: Toronto Canada
The SDX10 are in sealed enclosures the recommended size. I have a bit of a boost below the resonant frequency, and the bass is amazing. It goes as deep or deeper than the sub I had before but sounds much more integrated with the mids and tweeters. I have tried a few different crossover frequencies, and I have it at 147hz with a 24db FIR filter, so far that's what sounds best to me, but there are a lot of combinations to try.

The miniDSP is really easy to use and nice because you don't have to buy expensive capacitors and inductors every time you want to try different EQ or crossover or add some EQ. You program it via USB from a computer, but the computer does not need to be on for it to work. Some people might be too good for its DAC though I haven't really noticed it as sounding like anything, and it's certainly better than the one on any motherboard.

I'm going to redo my REQ because I moved some furniture. Ill post the graph after that.

Last edited by neutron7; 6th July 2013 at 04:19 PM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dx TriAmp bass unit destroyer X Solid State 163 17th June 2011 05:43 PM
SDX10 in 24L sealed sub build sam xt Subwoofers 21 15th February 2010 12:01 AM
Triamp with Chips r_s_dhar Chip Amps 0 4th November 2003 04:01 PM
Matching Gain and sensitivity for triamp Fritz Solid State 5 18th March 2003 04:26 PM
schematic+PCB pattern for a Triamp module r_s_dhar Analogue Source 0 18th December 2002 09:58 AM


New To Site? Need Help?

All times are GMT. The time now is 10:14 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2