• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

MX Series Kits

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
C

CSS/XBL

Member
Joined 2003
Hi,

The first in this series of kits is now in my listening room. It will be auditioned over the next few days.

8069195596_57e46a0c1e_z.jpg This is the MX 1.5, a single fold transmission line designed by Scott Lindgren for the Motus 8-9" woofer and the LD25X in the waveguide. Al has done 2 different crossovers and parts for both will be included. Dimensions are (WDH) 10.5" X 15" X 39.5".

Next will be the MX 1 which uses the same 2 drivers but in a standmount slot ported configuration.

The thrid design will be the MX 3.5, a 3-way using the Motus in the TL, the VWR126X as a mid and the stock LD25X tweeter.

Details to follow.

Bob
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom