New Drivers: VWR126X and LD25X

CSS/XBL · 04:33 PM

Hi,

Both the VWR126X (Very Wide Range) and LD25X (Low Distortion silk dome) production samples by air arrived this week. We will be posting data, pictures, etc. shortly and finalizing the introductory special pricing. The sea shipments will arrive in early January.

The following kit designs are in progress:

Simple ported MT in .25 cu ft with VWR125X running full/direct and the LD25X padded and rolled off with a single cap.

In wall MTM including centre.

In wall MTMMM and MMTMM centre.

Ported MTM in 14 litre (.5 cu ft)

Backloaded horn with 4 VWR126X per side and either a horn loaded planar or a ribbon tweeter.

A series of Fonken style designs from Dave Dlugos where we may ask for some naming help. See Dave's post on nomenclature.

Bob

tuxedocivic · 12th December 2011, 03:53 PM

Cool! Look forward to seeing some info on these both.

chrisb · 13th December 2011, 09:51 PM

XBL?

and oh yes, do u c how the Fonken naming will get even more complicated?

18Hurts · 15th December 2011, 03:03 AM

Very interesting,

Not often you see a 25mm tweeter with a 1.85mm Xmax and a Fs of 830Hz.

Two wide bands with the tweeter in a MTM format might make a really nice desktop monitor.

chrisb · 15th December 2011, 06:19 PM

looking good Bob - pricing settled yet for early birds and friends & family ?

tuxedocivic · 11th January 2012, 03:01 AM

Any update?

chrisb · 11th January 2012, 03:52 AM

Quote:

Originally Posted by tuxedocivic

Any update?

to paraphrase a song, I think "I'd like to get them off that slow boat from .... the factory"

tuxedocivic · 11th January 2012, 04:35 PM

I'm impatient

Any ballpark idea on pricing?

tuxedocivic · 13th January 2012, 03:46 PM

I don't see the preliminary spec sheets on HTS anymore? I'm interested in dimensions?

CSS/XBL · 13th January 2012, 04:36 PM

Quote:

Originally Posted by tuxedocivic

I don't see the preliminary spec sheets on HTS anymore? I'm interested in dimensions?

Hi,

There are some differences with the production units and we will post more complete specs and info shortly.

Bob

10th December 2011, 07:24 PM	#1
CSS/XBL diyAudio Member Join Date: Oct 2003	New Drivers: VWR126X and LD25X Hi, Both the VWR126X (Very Wide Range) and LD25X (Low Distortion silk dome) production samples by air arrived this week. We will be posting data, pictures, etc. shortly and finalizing the introductory special pricing. The sea shipments will arrive in early January. The following kit designs are in progress: Simple ported MT in .25 cu ft with VWR125X running full/direct and the LD25X padded and rolled off with a single cap. In wall MTM including centre. In wall MTMMM and MMTMM centre. Ported MTM in 14 litre (.5 cu ft) Backloaded horn with 4 VWR126X per side and either a horn loaded planar or a ribbon tweeter. A series of Fonken style designs from Dave Dlugos where we may ask for some naming help. See Dave's post on nomenclature. Bob Last edited by CSS/XBL; 13th January 2012 at 04:33 PM. Reason: Additional information

13th December 2011, 09:51 PM	#3
chrisb diyAudio Member Join Date: Aug 2002 Location: victoria BC	XBL? and oh yes, do u c how the Fonken naming will get even more complicated? __________________ you don't really believe everything you think, do you? community sites t-linespeakers.org, frugal-horn.com commercial site planet10-HiFi

15th December 2011, 06:19 PM	#5
chrisb diyAudio Member Join Date: Aug 2002 Location: victoria BC	looking good Bob - pricing settled yet for early birds and friends & family ? __________________ you don't really believe everything you think, do you? community sites t-linespeakers.org, frugal-horn.com commercial site planet10-HiFi

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Philips FR drivers/ EV fullrange drivers/ Vintage Wharfedale x/overs	devilsindetails	Swap Meet	2	28th November 2011 12:09 AM
FS: RS LX-4 drivers (Linaeum monopoles and 4" kevlar drivers)	JohnG	Swap Meet	2	2nd November 2011 01:00 AM
JBL comp drivers, Dayton Reference Sub drivers for auction NO RESERVE	pkpickard	Swap Meet	1	21st January 2009 03:19 AM
FS: Line Array Drivers - 84 drivers only $200.00!	Magnetar	Swap Meet	1	23rd August 2007 04:34 PM
Open-Baffle dipoles...a heresy to pair PA drivers w/ home drivers?	thadman	Multi-Way	7	11th November 2006 09:11 PM

12th December 2011, 03:53 PM	#2
tuxedocivic diyAudio Member Join Date: Jan 2011 Location: Victoria, BC	Cool! Look forward to seeing some info on these both.

15th December 2011, 03:03 AM	#4
18Hurts diyAudio Member Join Date: Nov 2010	Very interesting, Not often you see a 25mm tweeter with a 1.85mm Xmax and a Fs of 830Hz. Two wide bands with the tweeter in a MTM format might make a really nice desktop monitor.

11th January 2012, 03:01 AM	#6
tuxedocivic diyAudio Member Join Date: Jan 2011 Location: Victoria, BC	Any update?

11th January 2012, 04:35 PM	#8
tuxedocivic diyAudio Member Join Date: Jan 2011 Location: Victoria, BC	I'm impatient Any ballpark idea on pricing?

13th January 2012, 03:46 PM	#9
tuxedocivic diyAudio Member Join Date: Jan 2011 Location: Victoria, BC	I don't see the preliminary spec sheets on HTS anymore? I'm interested in dimensions?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read