diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   CSS (http://www.diyaudio.com/forums/css/)
-   -   New Drivers: VWR126X and LD25X (http://www.diyaudio.com/forums/css/202251-drivers-vwr126x-ld25x.html)

Cal Weldon 23rd June 2012 12:08 AM

:D Nice.

HiroPro 9th July 2012 12:56 AM

Well I know the DIY summer project I'm working on in the next couple weeks...

Pair of Tritons and a Quartet 10...

If the drivers haven't sold out!

BTW NICE ROOM RAW!!!

Henkjan 25th November 2012 09:47 PM

1 Attachment(s)
Quote:

Originally Posted by Henkjan (http://www.diyaudio.com/forums/css/202251-drivers-vwr126x-ld25x-post3062044.html#post3062044)

it's finally finnished:

Attachment 313972

Cal Weldon 7th December 2012 03:20 PM

Sure looks good, tell us your thoughts on the sound.

Henkjan 7th December 2012 08:30 PM

the short version: the best speakers I have built or owned. period.

the long version: this thing does it all: imaging at least as good as a good full range (singers are as real as if they are in the room), deep and punchy bass (drums are alive), powerfull sound, clean also at very high levels (no fatique at all), revealing every detail in the music but also every shortcoming in the rest of the chain (these are the reason I built an Hypex ncore amp and I am goint to upgrade my DAC to a Sabre).

tcostello 14th May 2014 05:08 PM

Quote:

Originally Posted by CSS/XBL (http://www.diyaudio.com/forums/css/202251-drivers-vwr126x-ld25x-post2814689.html#post2814689)
Hi,

Both the VWR126X (Very Wide Range) and LD25X (Low Distortion silk dome) production samples by air arrived this week. We will be posting data, pictures, etc. shortly and finalizing the introductory special pricing. The sea shipments will arrive in early January.

The following kit designs are in progress:

Simple ported MT in .25 cu ft with VWR125X running full/direct and the LD25X padded and rolled off with a single cap.

In wall MTM including centre.

In wall MTMMM and MMTMM centre.

Ported MTM in 14 litre (.5 cu ft)

Backloaded horn with 4 VWR126X per side and either a horn loaded planar or a ribbon tweeter.

A series of Fonken style designs from Dave Dlugos where we may ask for some naming help. See Dave's post on nomenclature.

Bob

@CSS/XBL Bob & Mark, I'm curious as to your overall experience of running the 4x VWR126x + Horn Tweeter in the back loaded horn design. Seen the pictures but not much was discussed about it.

Have you had a chance to do any comparissons with the Jeff B. Tritons or Jim Griffin MLTL?

The idea I had come up with while researching Quarter Wave/MathCad/PMC/Fostex/Lowther Horns, and T-Lines, was done very similarly on the Frugal Horn website as a Spawn Style Split horn enclosure. One of the new Ribbon tweeters in the middle, and a split upper/lower horn with dual VWR's.

Seeing the VWR's in a horn peaked my interest, not to mention the accolades on imaging & midrange clarity these woofers received in various configurations! Hopefully all went well with it!

Cheers from Timmins!

CSS/XBL 15th May 2014 02:05 PM

Hi,

I never got to hear the 4 plus horn and that design is no longer available as Mark had another customer.

We continue to experiment with ML-TL designs and I have some prototype/test cabinets here for 2 VWRs and the RT2, 2 VWRs and the LD22C, 1 LDW7 and the RT2 and 2 LDW7s and the RT2.

Some of drawings have been posted and there will be more as we get to it.

Thanks for your interest.

Bob

mwmkravchenko 15th May 2014 02:45 PM

Contact me off of the forum. We can discuss it there.

tcostello 15th May 2014 02:55 PM

Thanks for the quick responses to you both! Will be in touch Mark!


All times are GMT. The time now is 08:28 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki