Motor to drive platter in DIY Record Cleaning Machine

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Looking for recommendations for an AC or DC high torque/low RPM motor for my RCM. It will mount under the platter and drive the inside lip of the platter via a rubber idler wheel.

An externally hosted image should be here but it was not working when we last tested it.


It must be fairly small and have an easy way to mount it to the 1/4" thick top plate that is made of hardboard.

Thanks in advance for the recommendations!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.