Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Construction Tips Construction techniques and tips

Crown macrotech face plate restoration
Crown macrotech face plate restoration
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th June 2013, 08:39 PM   #1
kanks is offline kanks  United Kingdom
diyAudio Member
Join Date: Jun 2013
Location: UK
Default Crown macrotech face plate restoration

Hi not sure if this is the best place to ask but what would be a good way to restore the faceplate on a crown macrotech 1200. Its looking pretty sad so any ideas are welcome.

  Reply With Quote
Old 18th June 2013, 11:56 PM   #2
Enzo is offline Enzo  United States
diyAudio Member
Join Date: Sep 2004
Location: Lansing, Michigan
Is that one of the cast aluminum ones? (Or extruded or something)

I don't know why you couldn't use automobile cleaning products to clean it up. The panel comes off.

If you mean the printed part, you could contact Crown and see if replacements are available. Otherwise a good scrubbing ought to help. Isn't the printed face part a tough label glued onto the metal?
  Reply With Quote


Crown macrotech face plate restorationHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HiVi DMB-A does it have a plastic or metal face-plate? Jimmy154 Multi-Way 2 13th March 2013 07:28 PM
WTB: objective 2 face plate - in the USA JZatopa Swap Meet 1 25th June 2012 10:34 PM
how to remove the words on the face plate? i_like_pie116 Everything Else 4 18th February 2007 02:53 PM
Face Plate Printing and Silk Screening TubeHead Johnny Tubes / Valves 6 14th November 2006 11:33 AM
Face plate material Brian Donaldson Swap Meet 10 20th June 2004 05:11 AM

New To Site? Need Help?

All times are GMT. The time now is 10:34 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio