|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd May 2013, 08:19 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2013
|
Conical Horn + Midrange Enclosure
Hello. I'm quite new to audio, but I'm building a set of conical horns that mount on a midrange enclosure. I was wondering if anyone had any tips for an enclosure design that would work well with a horn mounted on top. I just purchased Eminence Delta-10A 10" Midrange Driver 8 Ohm, and will be using a Selenium D220TI 1" titanium horn driver with a crossover at 2,000 Hz. The midrange driver recommends a cubic volume from 12.7-37.9 liters.
Does anyone have tips on what type of enclosure would work well with this setup? Thanks! photo of horn |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Conical Horn with Markaudio Alpair10 FR | Henkjan | Full Range | 34 | 4th April 2011 03:26 AM |
| Eric Forker's 77hz conical horn | pumpkin1 | Multi-Way | 0 | 24th August 2010 11:43 AM |
| Conical Horn Dip | MaVo | Multi-Way | 13 | 17th March 2010 08:25 PM |
| conical horn damping material... | pauldune | Full Range | 14 | 14th March 2010 01:07 PM |
| Compensation for Conical Horn | Sheldon | Multi-Way | 1 | 11th November 2006 10:01 PM |
| New To Site? | Need Help? |
