Conical Horn + Midrange Enclosure

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello. I'm quite new to audio, but I'm building a set of conical horns that mount on a midrange enclosure. I was wondering if anyone had any tips for an enclosure design that would work well with a horn mounted on top. I just purchased Eminence Delta-10A 10" Midrange Driver 8 Ohm, and will be using a Selenium D220TI 1" titanium horn driver with a crossover at 2,000 Hz. The midrange driver recommends a cubic volume from 12.7-37.9 liters.

Does anyone have tips on what type of enclosure would work well with this setup?

Thanks!


photo of horn
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.