Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Construction Tips Construction techniques and tips

Subkick clone, a circuitry question
Subkick clone, a circuitry question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 5th April 2013, 10:54 PM   #1
adirhabany is offline adirhabany
diyAudio Member
Join Date: Aug 2010
Default Subkick clone, a circuitry question

So yeah, first post I think

I've build a mic out of a 2.5" speaker to use as an auxiliary microphone (for the extra lows), I've used an old full-range from peerless I had lying around and build a dumped case out of carbon fiber to house the speaker, wires and an XLR connector.

Used it to record some test sounds VIA my pc's sound card, got the 35-450Hz spectrum pretty flat, at about +/-2db, now i want to use it with a preamp attached to it (for mixers and such) and i got two options, the first, use an opamp based amp. second use an NPN based one, so i sat down and draw some schematics and tried to run a simulations to figure out what will yield the best results which turned out to be rather a difficult task.

So, can anyone with a bit more understanding in circuitry then me or even a better simulation software, help me?

Thanks in advance,

Attached Images
File Type: jpg speaker mic.jpg (419.5 KB, 19 views)
  Reply With Quote


Subkick clone, a circuitry questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PASS F5 Clone-Question CVSO915 Pass Labs 3 2nd October 2012 08:22 PM
Calling all electronics wizards! (circuitry question) gain wire Parts 9 12th January 2009 01:52 AM
some question?about clone 1sc hyl2369 Multi-Way 0 12th April 2005 03:24 PM
Question re. ProAc 2.5 clone Dave Jones Multi-Way 11 26th April 2004 05:53 AM
Question regarding ProAc 2.5 Clone and Tempo 2 Clone zoooh Multi-Way 5 11th March 2003 08:19 PM

New To Site? Need Help?

All times are GMT. The time now is 08:41 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio