check out blank chassis here Antique Electronic Supply LLC
Hard part is done - all you have to do is make openings.
Lots of choices, some with a nice painted finish on steel.
Hard part is done - all you have to do is make openings.
Lots of choices, some with a nice painted finish on steel.
You hinted at it already, but I'd have to question bending a chassis from scratch. I mean OK if you want a project and the satisfaction of doing it all yourself, but commercial chassis can be had from several sources, and they come already neatly constructed, appropriate cleanly made holes already in place, and in many cases the chassis is already plated and labeled.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.