Baffle CNC routering? (Southern Saskatchewan)

Simwiz · 26th October 2012, 08:06 PM

Hey Guys,
My first post to this forum (the crowd cheers)! I am wondering if any of you know where I might be able to pay someone to cut/router some baffles for a speaker project I am planning (small 7.5 liter single driver box)? I don't have the proper tools to do it here, but I don't want to pay $200+ for a pair of speaker cabinets.

Any suggestions? I will try and upload the speaker box design.

yai · 2nd November 2012, 06:38 AM

Hi,
as this is a round cutout and rebate, you don't need any CNC'ing. Just buy the cheapest router and a straight router bit and make yourself a trammel (google is your friend) and it is very easy to do.
bye,
yai.

planet10 · 2nd November 2012, 07:03 AM

If you have a friend with a router you don't even need to buy one. You can likely rent one as well (i know Home Despotwill, but that is a round trip to Regina)

dave

planet10 · 2nd November 2012, 07:04 AM

Quote:

Originally Posted by planet10

If you have a friend with a router you don't even need to buy one. You can likely rent one as well (i know Home Despotwill, but that is a round trip to Regina)

If pressed I could likely get Chris to do a baffle, but there must be someone closer

dave

2nd November 2012, 07:03 AM	#3
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	If you have a friend with a router you don't even need to buy one. You can likely rent one as well (i know Home Despotwill, but that is a round trip to Regina) dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Speaker baffle CNC or routing service in Australia	qusp	Swap Meet	1	27th June 2012 12:41 AM
Anybody in Saskatchewan?	davidallancole	Full Range	3	17th April 2007 02:47 AM
This is Saskatchewan calling, will you accept the charges?	ginsner	Introductions	12	23rd August 2006 09:44 PM
CNC cut baffle	herm	Multi-Way	45	14th February 2004 04:07 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd November 2012, 06:38 AM	#2
yai diyAudio Member Join Date: Aug 2011 Location: Jo'berg	Hi, as this is a round cutout and rebate, you don't need any CNC'ing. Just buy the cheapest router and a straight router bit and make yourself a trammel (google is your friend) and it is very easy to do. bye, yai.