diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Construction Tips (http://www.diyaudio.com/forums/construction-tips/)
-   -   Baffle CNC routering? (Southern Saskatchewan) (http://www.diyaudio.com/forums/construction-tips/222290-baffle-cnc-routering-southern-saskatchewan.html)

Simwiz 26th October 2012 08:06 PM

Baffle CNC routering? (Southern Saskatchewan)
 
1 Attachment(s)
Hey Guys,
My first post to this forum (the crowd cheers)! I am wondering if any of you know where I might be able to pay someone to cut/router some baffles for a speaker project I am planning (small 7.5 liter single driver box)? I don't have the proper tools to do it here, but I don't want to pay $200+ for a pair of speaker cabinets.

Any suggestions? I will try and upload the speaker box design.

yai 2nd November 2012 06:38 AM

Hi,
as this is a round cutout and rebate, you don't need any CNC'ing. Just buy the cheapest router and a straight router bit and make yourself a trammel (google is your friend) and it is very easy to do.
bye,
yai.

planet10 2nd November 2012 07:03 AM

If you have a friend with a router you don't even need to buy one. You can likely rent one as well (i know Home Despotwill, but that is a round trip to Regina)

dave

planet10 2nd November 2012 07:04 AM

Quote:

Originally Posted by planet10 (Post 3224695)
If you have a friend with a router you don't even need to buy one. You can likely rent one as well (i know Home Despotwill, but that is a round trip to Regina)

If pressed I could likely get Chris to do a baffle, but there must be someone closer

dave



All times are GMT. The time now is 02:37 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2