how do i get water droplet like finish on a pro speaker

[djchrisquad]

hi how do i get water droplet like finish on the surface of a pro audio speaker , i have heard that some manufacturers use acrylic liquid
this is the finish i require
http://kingblossomguitars.com/wp-content/uploads/2012/01/Water-drop-finish.jpg
or similar
Thanxs

 

[littlerick]

look on youtube for airbrushing water droplets, its pretty easy with airbrush.

 

[jackinnj]

Apply base coat, clear cost and allow to cure. You can then bulk up the "solids" in the clearcoat by allowing the solvent to evaporate a bit and "fleck" with a coarse brush. Cure the finish with some gentle heat. Practice

 

[JMFahey]

Speaker Cabinet Coatings | Texture Coating for Speakers | Road Cases Protective Coating
and you'll find many youtubes showing how to

 

[tripathidev]

apply polyurathene using spray gun! Before apply using polyurathene be careful with the quantity of hardner while mixing ìt! lowering the air pressure of the spray gun you can create a water drop texture on your speaker enclosure!

 

[amaco]

I don't think so, they have so many ways to create water droplets. Best