diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Construction Tips (http://www.diyaudio.com/forums/construction-tips/)
-   -   How to solve the eagle software of size and width (http://www.diyaudio.com/forums/construction-tips/220998-how-solve-eagle-software-size-width.html)

Doraemon 5th October 2012 01:40 PM

How to solve the eagle software of size and width
 
Q1.
i am beginner to use my eagle software to do my final year project... i download a chip from online library PIC18F4520 and print it out from schematic to PCB board... i found out the size was difference and not standard... it was smaller than the actual size and the width and pin size was small... Any solution to solve the problem... TQ...

Q2.
i try to do a chip from zero for the symbol, package, and device(PIC18F4520 pin 40)... i was stun at package and device... how do i continue... any easy way or faster way... TQ...

dangus 10th October 2012 01:06 AM

Most PCB CAD software allows you do design custom packages for chips. I believe the Eagle manual has a tutorial on creating your own devices. Maybe you can find another chip that uses the same package and edit that.

doctordata 10th October 2012 04:42 PM

You can use the IC-package library and select a 40 pin IC and just connect all the pins as they should . Print it out and see if it fits . If the scale is not right change the scaling factor in the print menu in Eagle .

Cheers , Rens


All times are GMT. The time now is 08:42 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2