|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
25th August 2012, 11:13 PM
|
#1 |
|
diyAudio Member
Join Date: Nov 2007
|
Linestage w. DAC - Layout help!
Okay!
So, i'm building my first completley-from-scratch pre-amp (have only modified amps before), and i will build in a Buffalo-dac and all that completely. Now before i drill the bottom for the PCB-standoffs i thought i would ask what you people think about the layout. Why i ask, is because it wouldn't be THAT fun drilling alot of holes in the bottom of the case and the the layout is bad and i get alot of hum. So here you can find a picture of the design: LINK Red wires is AC, Blue is DC and Green is signal. I also have wrote above all components what they are. The transformers/AC-filter will be covered by a aluminum housing. I have tried putting the AC in the middle, to get all AC as "collected" as i possibly can. Any comments about the layout will make me glad :-) |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Layout question for AK4396 Dac | Radian | Digital Source | 4 | 25th December 2007 11:20 AM |
| Comments for my PCM2702 DAC layout? | cetoole | Digital Source | 0 | 10th August 2006 08:56 AM |
| PCM4104 DAC PCB Layout | meta | Digital Source | 3 | 5th July 2004 02:00 PM |
| DIY DAC suitable for passive transformer linestage (TVC)? | Saurav | Digital Source | 2 | 19th August 2003 12:40 AM |
| New To Site? | Need Help? |
