|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
3rd August 2012, 03:07 AM
|
#1 |
|
diyAudio Member
Join Date: Jun 2010
Location: SE Pennsylvania
|
Transformer orientation
This is a 17 X 8 chassis. Here is a pic of how I'm thinking of putting transformers on my 6B4G SET amp. The RCA boxes are where the power triodes will be on. and two circles on PCB are a driver and a rectifier.
On left I have end bells where power TX will be and on right those 2 are output TX. Is the orientation good or will be problem since I have heard power and output should be arranged 90 degrees from each other due to magnetic flux from power TX? Or it shouldn't be a problem since they are 9 inches apart? 
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Orientation of E-I core OPT and toroidal power transformer | tomchr | Tubes / Valves | 4 | 27th December 2009 05:02 AM |
| Transformer orientation | Skorpio | Pass Labs | 5 | 12th May 2006 01:25 AM |
| Mains transformer orientation | Rocky | Tubes / Valves | 20 | 23rd November 2005 10:52 AM |
| EI transformer orientation | ultrachrome | Power Supplies | 3 | 28th March 2005 04:11 PM |
| Toroidal transformer mounting & orientation | nic.hanno | Parts | 0 | 9th April 2004 11:32 AM |
| New To Site? | Need Help? |
