diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Construction Tips (http://www.diyaudio.com/forums/construction-tips/)
-   -   Front Panel Express Files (http://www.diyaudio.com/forums/construction-tips/211519-front-panel-express-files.html)

MrMajestic 25th April 2012 03:46 PM

Front Panel Express Files
 
I just did a few layouts of pcb boards in Front Panel Designer and I though I should share:

Twisted Pear Audio Buffalo II
https://docs.google.com/open?id=0Bw7...zRsLVdVR2hjYkk

Twisted Pear Buffalo III
https://docs.google.com/open?id=0Bw7...kxLRkt4SWNWSEU

Twisted Pear Audio IVY III
https://docs.google.com/open?id=0Bw7...nplUmJITHpDZkk

Twisted Pear Audio Placid HD Bipolar
https://docs.google.com/open?id=0Bw7...nAzMW4tdDJHcnc

Twisted Pear Audio Placid HD
https://docs.google.com/open?id=0Bw7...nZ6SE4wQkRWblU

Cavalli Kan-Kumisa III
https://docs.google.com/open?id=0Bw7...jdoZjFLTlQ2a0k

AMB B22
https://docs.google.com/open?id=0Bw7...WpGaVY4QzhnTFE

AMB S22
https://docs.google.com/open?id=0Bw7...FZQYVlwSW9WOG8

These are useful to when doing layouts of builds and also when ordering drilled panels. You can easily make macros of them as well. I took the measurements from Twisted Pears and AMBs websites.

New Additions:

Hifi 2000 chassis panels:

Galaxy GX14X front:
https://docs.google.com/open?id=0Bw7...mEwdVcxRmNCd3M

Galaxy GX14X back:
https://docs.google.com/open?id=0Bw7...i1ucHJuSWVPNzQ

Galaxy GX24X front:
https://docs.google.com/open?id=0Bw7...TRxa1p0Y0VvMDA

Galaxy GX24X back:
https://docs.google.com/open?id=0Bw7...DNNNm13VWdlTmM

Galaxy GX34X front:
https://docs.google.com/open?id=0Bw7...zBHbkJ6YkI5dFU

Galaxy GX34X back:
https://docs.google.com/open?id=0Bw7...WdLNlJzbVZ1SUk

Galaxy Maggiorato GX18X front:
https://docs.google.com/open?id=0Bw7...jRIN1hvSENtSHc

Galaxy Maggiorato GX18X back:
https://docs.google.com/open?id=0Bw7...1h6Q3BqT2RCWXc

Galaxy Maggiorato GX28X front:
https://docs.google.com/open?id=0Bw7...2lydk5ybWNJcUU

Galaxy Maggiorato GX28X back:
https://docs.google.com/open?id=0Bw7...V9iZXJuT01hbXc

Galaxy Maggiorato GX38X front:
https://docs.google.com/open?id=0Bw7...W8teFJYdU0teGc

Galaxy Maggiorato G38X back
https://docs.google.com/open?id=0Bw7...m00bUU0YXhzWms

Slimline 1U front:
https://docs.google.com/open?id=0Bw7...VBIR0xmZ0ljeUE

Slimline 1U back:
https://docs.google.com/open?id=0Bw7...0VGb0s1QVNycVk

Slimline 2U front:
https://docs.google.com/open?id=0Bw7...GNaeGRBWTNMb2c

Slimline 2U back:
https://docs.google.com/open?id=0Bw7...ThMYkJxMkFvbG8

New additions 2012-05-09:

Pesante Dissipante 4U front:
https://docs.google.com/open?id=0Bw7...FA3cDhDQXZEUXc

Pesante Dissipante 4U back:
https://docs.google.com/open?id=0Bw7...mJHZWQ3QWl5RzQ

Pesante Dissipante 5U front:
https://docs.google.com/open?id=0Bw7...mtkMnVheURvVHM

Pesante Dissipante 5U back:
https://docs.google.com/open?id=0Bw7...0R0X3NqYnNNdjA

Keep in mind that I've never seen a Pesante Dissipante case so I just had the files from Hifi2000 to go on.

MrMajestic 25th April 2012 08:37 PM

Feel free to add your own files in this thread.

MrMajestic 26th April 2012 02:04 PM

Maybe this thread would be better under "Construction Tips". Perhaps a mod could move it?

qusp 26th April 2012 02:25 PM

if you want it moved dont wait for them to stumble upon your post, use the report this post button in the bottom left with the exclamation mark and tell them you would like it moved. handy documents mate!

Telstar 26th April 2012 02:45 PM

When you get time, could you do the original Kumisa III:
HeadWize - Project: The Kumisa III Headphone Amplifier by Benny Jørgensen

Or you think that would be easy using the C2KIII pcb (yours or AMB ones)?

MrMajestic 26th April 2012 03:15 PM

Quote:

Originally Posted by Telstar (Post 3001747)
When you get time, could you do the original Kumisa III:
HeadWize - Project: The Kumisa III Headphone Amplifier by Benny Jørgensen

Or you think that would be easy using the C2KIII pcb (yours or AMB ones)?

Not sure what you mean, but the files I have posted are not actual files for making pcbs. They are just the layout for Front Panel Designer to check layouts for cases.

AMBs boards are great by the way. Im building one right now.

MrMajestic 26th April 2012 03:18 PM

Quote:

Originally Posted by qusp (Post 3001723)
if you want it moved dont wait for them to stumble upon your post, use the report this post button in the bottom left with the exclamation mark and tell them you would like it moved. handy documents mate!

Ok, thanks. Didnt think of that.

wintermute 27th April 2012 04:07 AM

:cop: moved.

Telstar 27th April 2012 03:32 PM

Quote:

Originally Posted by MrMajestic (Post 3001781)
Not sure what you mean, but the files I have posted are not actual files for making pcbs. They are just the layout for Front Panel Designer to check layouts for cases.

AMBs boards are great by the way. Im building one right now.

I misunderstood, nevermind.

MrMajestic 8th May 2012 09:38 AM

Added a bunch of Hifi 2000 panels


All times are GMT. The time now is 12:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2