diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Construction Tips (http://www.diyaudio.com/forums/construction-tips/)
-   -   Cutout driver frame (http://www.diyaudio.com/forums/construction-tips/211025-cutout-driver-frame.html)

vintvolt 18th April 2012 12:03 PM

Cutout driver frame
 
1 Attachment(s)
Hi all,
I want to mount a driver (Fostex FF125WK) flush, so need to make a 4 mm deep cutout following the shape of the driver frame. See attached picture.

The enclosure is going to be cut with CNC, following a CAD drawing

Any tip how can I make the exact shape in Illustrator ? So that an accurate and smooth shape can be cut with CNC?

Thanks

vintvolt 19th April 2012 10:36 AM

1 Attachment(s)
Ok, it took some time for trial & error, but I managed to do it.

If anyone needs the .ai file, let me know.


All times are GMT. The time now is 03:10 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2