Potentiometer as a volume control - diyAudio
Go Back   Home > Forums > Design & Build > Construction Tips

Construction Tips Construction techniques and tips

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th March 2012, 04:52 PM   #1
RRSS is offline RRSS  United Kingdom
diyAudio Member
 
Join Date: Mar 2012
Location: Leeds, UK
Default Potentiometer as a volume control

Hi,
Im new to the forum and fairly new to audio electronics.
I am in need of some help, I have built a dub sound system with a mate of mine and am now in the process of making a rack mounted volume control to control the level of the bass without having to adjust the two volume channels on the power amp.
We run everything in mono.
The volume wheel I am making is to be placed in-between the limiter/crossover and amp. I have a left and right channel I need to put into it, so I was thinking with it being in mono just attaching the +L input to +R and L to R, leaving two inputs I need to send to the pot, (and obviously the same for the output.)
Could someone please tell me the best way to wire the pot?
(I think I have looked into it too much and all the different ways of wiring them have just been moulded together in my mind.)
I understand as much as point 1 on the pot is ground, 2 out and 3 in, but what does one do when there are two poles to send into it and out of it??

Any help would be greatly appreciated!!

Joe
  Reply With Quote
Old 29th March 2012, 05:26 PM   #2
diyAudio Member
 
Join Date: Sep 2004
Location: New Zealand
Quote:
Originally Posted by RRSS View Post
Hi,
I’m new to the forum and fairly new to audio electronics.
I am in need of some help, I have built a dub sound system with a mate of mine and am now in the process of making a rack mounted volume control to control the level of the bass without having to adjust the two volume channels on the power amp.
We run everything in mono.
The volume wheel I am making is to be placed in-between the limiter/crossover and amp. I have a left and right channel I need to put into it, so I was thinking with it being in mono just attaching the +L input to +R and –L to –R, leaving two inputs I need to send to the pot, (and obviously the same for the output.)
Could someone please tell me the best way to wire the pot?
(I think I have looked into it too much and all the different ways of wiring them have just been moulded together in my mind.)
I understand as much as point 1 on the pot is ground, 2 out and 3 in, but what does one do when there are two poles to send into it and out of it??

Any help would be greatly appreciated!!

Joe
Hi Joe
The traditional circuit is for attenuation ( reduction in volume ) is called an L pad which is a voltage divider. As one wiper traverses in one direction the other does the opposite. We call the two parts of an L pad , one is Series ie that resistance that connects the source via variable resistance to a summing point, from that summing point which is the output, the next part is called Shunt that varies resistance as well before it goes to ground, the two poles are likely to be there to assist this direction change.

If you have access to a multimeter you can measure the way each connection is going with switching your meter to Ohms. If we join the wiper the central connector (2) to 1 and observe the resistance change on 3, we have the pot working to suit in one direction. So the other needs to be (2) and 3 joined and the connection on 1 gives us resistance but heading in the opposite direction.... just what we need for an L pad.

See:Uneeda Audio - Build your own attenuator pads

You will find these same circuits being used in somewhat naughty Speaker use, however the wattage is much much higher. In speaker use, they are sacrificing audio quality, as the amplifier for audio has enough to do, let alone contending with variable resistances. and L pads are used in very high frequency circuits with very specific resistance.

Cheers / Chris

Last edited by Chris Daly; 29th March 2012 at 05:35 PM.
  Reply With Quote
Old 29th March 2012, 06:36 PM   #3
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
Quote:
Originally Posted by RRSS
so I was thinking with it being in mono just attaching the +L input to +R and –L to –R, leaving two inputs I need to send to the pot, (and obviously the same for the output.)
That should be fine. To be sure, you could include a low value resistor in the +L and +R feeds but in most cases the previous stage will include these in its output anyway.
  Reply With Quote
Old 29th March 2012, 10:41 PM   #4
godfrey is offline godfrey  South Africa
diyAudio Member
 
Join Date: Nov 2009
Location: Cape Town
Agree with DF96. Maybe use a 10K log potentiometer and 1K resistors.

One other thing, though. I'm not really familiar with this kind of equipment, but shouldn't the limiter go after the volume control?
  Reply With Quote
Old 30th March 2012, 08:45 AM   #5
RRSS is offline RRSS  United Kingdom
diyAudio Member
 
Join Date: Mar 2012
Location: Leeds, UK
Cheers for the input guys!

So if I soulder the + wire to point 3 on the pot, what do I do with the - wire? Do I treat it as the earth? or do I bypass the pot with it completely?


Quote:
Originally Posted by godfrey View Post
Agree with DF96. Maybe use a 10K log potentiometer and 1K resistors.

One other thing, though. I'm not really familiar with this kind of equipment, but shouldn't the limiter go after the volume control?
Hi Godfrey, The limiter is a crossover as well, (Behringer DCX2496) so if the volume control was before it, it would alter the volume of all 3 crossover channels, it is just the bass I am looking to be able to adjust.

Cheers,
Joe.
  Reply With Quote
Old 30th March 2012, 09:48 AM   #6
godfrey is offline godfrey  South Africa
diyAudio Member
 
Join Date: Nov 2009
Location: Cape Town
Hi

I meant to wire it up like in the pic below.

This is assuming that the equipment has single ended inputs and outputs (e.g. with RCA connectors). In that case L- and R- are both earth connections.

If it's balanced (e.g. with XLR connectors), then the story gets more complicated.


edit: Drat, I looked up the Behringer DCX2496, and it only has balanced outputs. I'll post plan B in a few minutes.
Attached Images
File Type: gif pot.GIF (2.4 KB, 201 views)

Last edited by godfrey; 30th March 2012 at 10:15 AM.
  Reply With Quote
Old 30th March 2012, 10:15 AM   #7
godfrey is offline godfrey  South Africa
diyAudio Member
 
Join Date: Nov 2009
Location: Cape Town
I think the easiest will be to just use the "+" outputs from the Behringer, and leave the "-" outputs unconnected, unless someone else has a better idea.

Depending on the Behringer's circuitry, it might work better if you put a resistor from each "-" output to ground as well. Resistors only cost a few pence for a bag of 10, so experimentation is (financially) painless.
Attached Images
File Type: gif pot.GIF (3.5 KB, 194 views)

Last edited by godfrey; 30th March 2012 at 10:27 AM.
  Reply With Quote
Old 30th March 2012, 10:20 AM   #8
RRSS is offline RRSS  United Kingdom
diyAudio Member
 
Join Date: Mar 2012
Location: Leeds, UK
Cheers for the diagram, that makes sense.
Would it definitely work without the - poles connected?
  Reply With Quote
Old 30th March 2012, 11:33 AM   #9
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
If the Behringer has genuine balanced circuitry, then probably no as the '-' has to take the signal return current. If only pseudo-balanced then it should be OK. On cheap semi-pro gear 'balanced' is often only pseudo-balanced.

If it is only a short connection in a benign low-noise environment then you can may get away with an unbalanced volume pot in a 'balanced' connection: just treat '-' as ground for the pot.
  Reply With Quote
Old 30th March 2012, 11:40 AM   #10
RRSS is offline RRSS  United Kingdom
diyAudio Member
 
Join Date: Mar 2012
Location: Leeds, UK
Fantastic. I understand all this now.
I will have a play around and let you know how it all turns out.

Thank you both very much for your help!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Volume Control Potentiometer Recommendation? TheLaw117 Parts 3 18th September 2010 11:01 PM
Volume Control (potentiometer) SergeDufour Parts 1 6th December 2006 10:56 PM
Digital potentiometer as volume control Bricolo Solid State 15 29th January 2003 09:32 PM


New To Site? Need Help?

All times are GMT. The time now is 07:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2