diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Construction Tips (http://www.diyaudio.com/forums/construction-tips/)
-   -   Frontloading CD-Pro2 (http://www.diyaudio.com/forums/construction-tips/206397-frontloading-cd-pro2.html)

netsrohT 10th February 2012 01:28 PM

Frontloading CD-Pro2
 
Hi.
I was looking for a frontloader for the CD-Pro2. DAISy did not even respond though twice contacted. For experiment reason modified a CDM2-Loader (out of a Philips CD151/Marantz 273) with a lot of aluminium strives and a warm-hearted portion two-component adhesive.
Well, at last it works. Now: Is there somebody with mechanical engineering skills who would like to establish a small series of loader-mechanics? It would be fine to build an aluminium based one, wouldn't it?
Electronical engineering and controller-programming skills are present.

Best regards
ts





Geben Sie Text oder eine Website-Adresse ein oder lassen Sie ein Dokument übersetzen.
Abbrechen

akuperf 3rd April 2012 10:39 AM

Dear ts,
we are planing a front loading mechanism. The fisrt step you see here
Sub-Chassis for CD-Pro2lf, aluminium - Audio Intense -
For this sub chassis we develop a linear sliding system with motor.
The software is ready.
It will take about one month until the first sample will be ready.

More informtions about us you can find here:
Home Akustik Perfekt

kind regards
Horst Wenzel
Akustik Perfekt
Germany

netsrohT 3rd August 2012 07:13 AM

DIY-Frontloader
 
Complete step-by-step-DIY-manual for a CDpro2-frontloader can be found here:
http://http://www.stuppi-engineering.de/?q=node/53


All times are GMT. The time now is 07:24 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2