|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
17th January 2012, 05:58 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2012
Location: Montreal
|
Update/upgrade for Craig Anderton's Electronic projects for musicians
Hello everyone
I am fairly new into dyi electronics/music gear and here it is: I started reading Craig Anderton Electronic projects for musicians and I as started shopping for parts, I realized most of the IC's (mostly op-amps) are no longer available and obsolete (RC4136 and RC4739 as an example). There are some sockets available on the market that change the pin order and other "MacGyver" workarounds but I figured out that I could just start looking for something a tad more "up-to-date".  Does anyone have any suggestions? Should I roll with these workarounds or should I just find projects that are more recent considering that I am a rookie at this? 
Last edited by sourultrafast; 17th January 2012 at 06:39 PM. |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| female musicians- | tomtt | Music | 471 | 18th April 2013 12:14 AM |
| Non existing musicians | Netlist | Music | 5 | 30th December 2011 11:15 AM |
| Realistic Mach One Upgrade/Update | dmongrain | Multi-Way | 31 | 11th May 2010 02:41 AM |
| Craig Anderton appearing at Chuck Levins | Da5id4Vz | Everything Else | 0 | 8th September 2003 07:49 PM |
| Any musicians out there making their own music? | specialx | Everything Else | 0 | 30th September 2002 01:56 AM |
| New To Site? | Need Help? |
