Dis-assembly of magnet? anyone know a LESS risky way? - diyAudio
Go Back   Home > Forums > Design & Build > Construction Tips
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Construction Tips Construction techniques and tips

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 21st September 2011, 05:02 AM   #1
diyAudio Member
mondogenerator's Avatar
Join Date: Sep 2009
Location: City Of Villans
Blog Entries: 1
Default Dis-assembly of magnet? anyone know a LESS risky way?

I have a couple of cheapish midbasses lying around, and I was thinking of removing the dustcap, and installing a phase plug.

since the cones are fairly delicate, ive changed my mind about that particular idea

However, I would like to try and remove the magnet assembly from the rear of the basket, in order to get a nice pole piece vent drilled through. Of course swarf precautions taken.

I would just like to know if anyone has any tips on how i can do this safely, or if there is any solvent/method to help soften the bond.
Balancing the things I must do, with the things I'd like to do...This is a skill (or a luxury) amongst many that I do not possess.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Submitted for your (dis) approval, OTL, Autobias Inv. Futterman Alastair E Tubes / Valves 21 4th February 2014 02:04 AM
magnet design 101 - saturate iron with a ferrite magnet? capslock Multi-Way 18 28th April 2010 05:51 AM
Is this risky? cbutterworth Tubes / Valves 5 14th April 2007 03:02 AM
what are the advantages and dis adv of IMP cone subwoofers? diysmartdeep21 Subwoofers 3 15th February 2005 03:01 PM
P3A Bridged on 42v- how risky? Patrat Solid State 10 11th January 2003 05:37 PM

New To Site? Need Help?

All times are GMT. The time now is 05:52 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2