Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Construction Tips Construction techniques and tips

Point to Point build tips
Point to Point build tips
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th August 2011, 02:03 PM   #1
nightanole is offline nightanole  United States
diyAudio Member
 
Join Date: Feb 2009
Default Point to Point build tips

This will be my 2nd attempt and doing a pp point to point build (first one didnt turn out so good). Any tips on what do do first?
I was thinking:
Wire heaters first as close to the alum chassis as possible, strait across the pp pair.
Wire the power supply in the corner.
Make a buss ground along the center of the amp out of solid core house grounding wire(12 gauge).
wire high voltage as close to the chassis as possible.
Wire the rest of the amp, trying my best to keep things at a 90 to the power and heater wires.


Also im wiring new school, so chassis is earth ground, then ground loop isolated to power/signal ground, and input is isolated from chassis. On that note im using an internal usb dac, and was wondering if i should earth ground the usb cable shield, or leave the whole thing float since pc shield is normally pretty noisy.
  Reply With Quote
Old 25th August 2011, 04:01 PM   #2
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
AC heaters need tightly twisted wire near the chassis. DC heaters it doesn't matter.

Bus ground is fine, as long as things connect to it in the right order and you don't use it as part of the PSU ground. Keep charging pulses well away from the bus, then just connect a single wire from PSU ground to bus.

Keep connections fairly short, and use grid stoppers (small ones for hi-fi, bigger for guitars).
  Reply With Quote
Old 26th August 2011, 01:29 PM   #3
v4lve lover is offline v4lve lover  Netherlands
diyAudio Member
 
Join Date: Aug 2010
Location: Surrounded by glass
Point to Point build tips
tektronic ceramic tag strips . silver solder . and nice solid core wire not tho tick tho .
  Reply With Quote
Old 26th August 2011, 02:08 PM   #4
TheGimp is offline TheGimp  United States
diyAudio Member
 
TheGimp's Avatar
 
Join Date: Aug 2009
Location: Johnson City, TN
When I'm running a busbar ground for input and preamp tubes I still make a star ground with the filter caps, output tube cathode connections, and bus connecting at the same point. This is also my ground to chassis point. This helps keep the output tube current and charging current out of the preamp stage ground.
  Reply With Quote

Reply


Point to Point build tipsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any tips for Point-To-Point construction? jkuetemann Construction Tips 1 7th March 2011 12:04 AM
Point to Point build info littlerick Chip Amps 8 6th January 2010 11:14 PM
Point to point, from scatch build of the K-12G jmillerdoc Tubes / Valves 0 25th October 2009 12:40 AM
Benifits of point to point wiring for digital circuit? MGH Digital Source 15 14th September 2006 10:17 PM
Audio Note's Kit One done in point-to-point wiring Wram Tubes / Valves 18 29th April 2003 10:59 PM


New To Site? Need Help?

All times are GMT. The time now is 04:11 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki