|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st May 2011, 10:48 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2005
Location: Phoenix, Arizona
|
amp input wires be crossed threaded or left straight
I have put Arjen Helder's amp in a wood case added pot and 2way input selector (pot is on the left near the amp, power switch in the middle, input selector in from of PSU. I have seen some pictures of DIY amp where the signal from the source is wound around each other (twisted).
I took this picture looking into the amp from the rear. I hot glued the wires from the input on the wall of the unit. Should these wires from source input get twisted? thanks, gychang
__________________
-- Good sound from  Phoenix, AZ
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| First post straight out of left field | Ged II | Multi-Way | 10 | 7th April 2011 10:27 PM |
| Left scope on all day with no input by accident | bigwill | Equipment & Tools | 6 | 14th September 2009 04:27 PM |
| B&G NEO8 PLANAR TRANSDUCER crossed to two Dayton classic 8"(DC200-8) | nunayafb | Planars & Exotics | 28 | 13th April 2009 08:28 AM |
| Conductors (I.C.'s, RCAs, internal wires, speaker wires) | bigphil | Parts | 1 | 25th November 2005 06:47 PM |
| New To Site? | Need Help? |
| Page generated in 0.06700 seconds (66.17% PHP - 33.83% MySQL) with 11 queries |
