Iwata for TAD 4003 - Page 2

Alois · 23rd June 2011, 06:08 PM

Is this project still ongoing? Has any progress been made?

I am using TH-4001 clones on my TD-4003 drivers and would like to try something else. I would be interested to see how you tackle such a challenge.

Alois

PeterDupont · 24th June 2011, 09:11 AM

Quote:

Originally Posted by Alois

Is this project still ongoing? Has any progress been made?

I am using TH-4001 clones on my TD-4003 drivers and would like to try something else. I would be interested to see how you tackle such a challenge.

Alois

Hi Alois,
We have decided to use the Radian 950. The Iwata horns will be CNC'ed around september where we will try different adapters to cope with the Radian drivers very short and 20 degree angled throat. I'll be back when we get there.

Regards
Peter

Alois · 2nd November 2011, 01:36 PM

Hi Peter

I am curious to see where you stand with your project.

Best regards,
Alois

sannax · 23rd November 2011, 04:52 PM

I am curious to how this project is going? I can't seem to open the PDF files..not working?

PeterDupont · 24th November 2011, 05:28 PM

Hi Sannax,
The two 1:1 files can be downloaded here:

www.peterdupont.dk/Iwata_bottom.pdf
www.peterdupont.dk/Iwata_side.pdf

We are still working on the lathe for routing the Iwata top/bottoms - but there has been a lot of annoying inbetween stuff which has slowed things down.
To be certain we have everything in order before we start up with expensive wood we have experimented with the much easier TAD.
I'll get back when we get further.

Regards
Peter

PeterDupont · 24th November 2011, 05:33 PM

And Alois, this was also for your kind request.

Regards
Peter

sannax · 24th November 2011, 07:44 PM

Thanks for the pdf's, Peter! Will be following this thread

PeterDupont · 25th November 2011, 07:55 AM

I think that the drawings came from an article in the french Revue du Son. If anyone has other maybe more precise drawings, please come forward.

Regards
Peter

hahayan · 19th December 2011, 07:04 AM

HI ALL

I am new from here and new for building my own speaker..too

I am from Asia, Hong Kong China, I want to build something based on the 4003 too, the drawing seem wonderful , is it for 4001 or 4003?

What kind of wood is best for this? is it too much if..i go for soem tone wood for piano or Viola..or making Guitar? I have vendor for CNC..or ..other way to make it nicely..

hahayan · 19th December 2011, 07:43 AM

I heard and like the 4001 very much, however never hear a 4003 , wondering..how;s the different and worth the cost different?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Small Iwata 700Hz and more horns and drivers	Gluca	Swap Meet	7	14th January 2012 01:39 PM
Compression Driver for the IWATA-300	doug20	Multi-Way	20	5th February 2011 11:51 AM
TAD th-4003 drawings ?	matsj	Multi-Way	0	14th April 2010 07:09 AM
Wtb:Tad TL-1102, Td-4003, Et-703	matsj	Swap Meet	2	24th April 2008 01:01 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd June 2011, 06:08 PM	#11
Alois diyAudio Member Join Date: Jun 2002 Location: Zurich	Is this project still ongoing? Has any progress been made? I am using TH-4001 clones on my TD-4003 drivers and would like to try something else. I would be interested to see how you tackle such a challenge. Alois

2nd November 2011, 01:36 PM	#13
Alois diyAudio Member Join Date: Jun 2002 Location: Zurich	Hi Peter I am curious to see where you stand with your project. Best regards, Alois

23rd November 2011, 04:52 PM	#14
sannax diyAudio Member Join Date: Nov 2008	I am curious to how this project is going? I can't seem to open the PDF files..not working?

24th November 2011, 05:28 PM	#15
PeterDupont diyAudio Member Join Date: Mar 2011 Location: Copenhagen	Hi Sannax, The two 1:1 files can be downloaded here: www.peterdupont.dk/Iwata_bottom.pdf www.peterdupont.dk/Iwata_side.pdf We are still working on the lathe for routing the Iwata top/bottoms - but there has been a lot of annoying inbetween stuff which has slowed things down. To be certain we have everything in order before we start up with expensive wood we have experimented with the much easier TAD. I'll get back when we get further. Regards Peter

24th November 2011, 05:33 PM	#16
PeterDupont diyAudio Member Join Date: Mar 2011 Location: Copenhagen	And Alois, this was also for your kind request. Regards Peter

24th November 2011, 07:44 PM	#17
sannax diyAudio Member Join Date: Nov 2008	Thanks for the pdf's, Peter! Will be following this thread

25th November 2011, 07:55 AM	#18
PeterDupont diyAudio Member Join Date: Mar 2011 Location: Copenhagen	I think that the drawings came from an article in the french Revue du Son. If anyone has other maybe more precise drawings, please come forward. Regards Peter

19th December 2011, 07:04 AM	#19
hahayan diyAudio Member Join Date: Sep 2009 Location: Hong Kong	HI ALL I am new from here and new for building my own speaker..too I am from Asia, Hong Kong China, I want to build something based on the 4003 too, the drawing seem wonderful , is it for 4001 or 4003? What kind of wood is best for this? is it too much if..i go for soem tone wood for piano or Viola..or making Guitar? I have vendor for CNC..or ..other way to make it nicely..

19th December 2011, 07:43 AM	#20
hahayan diyAudio Member Join Date: Sep 2009 Location: Hong Kong	I heard and like the 4001 very much, however never hear a 4003 , wondering..how;s the different and worth the cost different?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)