Toner Transfer Paper Problems - Page 13 - diyAudio
Go Back   Home > Forums > Design & Build > Construction Tips
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Construction Tips Construction techniques and tips

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th September 2013, 04:52 PM   #121
diyAudio Member
albertli's Avatar
Join Date: Nov 2004
Location: Vancouver
Originally Posted by ArtG View Post
Concerning H2O2:
You can buy 3% peroxide at WalMart and other suppliers dirt cheap, but higher concentrations are considerably more expensive. It's quite easy to concentrate it yourself by boiling since water boils at 212F and H2O2 about 350F. The process simply involves heating the peroxide to the point that bubbles and mist appears, and let it go until a 50% volume reduction is achieved (for 6% solution).
There is a video somewhere on YouTube that shows the simple process.
Keep your H2O2 in a closed bottle, and as full as practical, since peroxide quickly gives up its extra oxygen molecule, and looses strength, eventually turning back to plain water.
  Reply With Quote
Old 15th October 2013, 09:30 AM   #122
diyAudio Member
noSmoking's Avatar
Join Date: May 2010
Location: Texas
I use a flux I got at radio shack,I use just enough to coat the copper on the board any excess gets the board sticky,I sometimes heat the board with a heat gun this levels the flux and dries it out and it's not sticky anymore now the traces can be soldered and won't corrode and it's cheep,lol.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
WHICH Laminator for Toner Transfer? RaymondW Equipment & Tools 46 22nd February 2017 02:56 PM
Toner transfer problems john blackburn Construction Tips 11 11th December 2010 08:54 AM
I tried toner transfer today... gmikol Parts 11 13th December 2006 06:00 AM
Laminator for PCB Toner Transfer? dfdye Parts 16 29th May 2006 02:52 PM
Toner transfer with a twist -- anyone tried this? rif Everything Else 17 7th September 2005 12:10 AM

New To Site? Need Help?

All times are GMT. The time now is 11:10 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2