Am I on the right track? - diyAudio
Go Back   Home > Forums > Design & Build > Construction Tips

Construction Tips Construction techniques and tips

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th April 2010, 09:48 AM   #1
diyAudio Member
 
Join Date: Apr 2010
Default Am I on the right track?

I am going to be purchasing this Miniwatt N3 tube amp I have my speaker setup all done however I wanted to connect my headphones via a 1/4 jack. They have this headphone adaptor available However I kind of want to build my own unit.

This is where I am at so far.

I want to start with this aluminum project box (I really want the black one but it seems its out of stock)

Die-Cast Aluminum Project Box - 4.37'' x 2.37'' x 1.21'' | BUD Industries | CU-124 (CU124)


On the rear I would have 4 gold plated RCA jacks (color coded)

Gold Plated RCA Chasis Mount Jack With Black Marking | Distributed By MCM

Next on the front I would have my 1/4 jack

Chassis Mount Closed Circuit Stereo 1/4 in Jack

From everything that I read, I pretty much need a step drill bit to drill the aluminum correct? Are there ever any local stores that would do it for you?

Also are any of you familiar with casing that looks close to the headphone adaptor I like how it sits flush :-)

Anyways Im just planning things out. Wanted to see if I could put it all together, seems pretty neat :-)
  Reply With Quote
Old 24th April 2010, 02:01 PM   #2
joeyou3 is offline joeyou3  United States
diyAudio Member
 
joeyou3's Avatar
 
Join Date: Apr 2010
Location: Lake Wales, Florida
Best way to make perfect holes for these is with a greenlee punch the correct size. Electricians have a lot of them, find a friendly electrician willing to lend you this punch.
  Reply With Quote
Old 26th April 2010, 06:38 AM   #3
Kinnja is offline Kinnja  United States
diyAudio Member
 
Join Date: Jan 2007
Step bits are nice but they are expensive, any drill bit the right size that can drill metal will work.

It can be hard to drill precisely where you want because the spinning bit is going to want to move around a bit. I get good results by using small drill stand, and clamping the piece being drilled.
  Reply With Quote
Old 27th April 2010, 07:46 AM   #4
diyAudio Member
 
Join Date: Jul 2004
Location: Edmonton, AB Canada
Coaxial,

You are making a headphone output box?

That connects to the amp's banana jack speaker outputs, not the (input) RCA's. So you don't need 4 RCA jacks, you would use banana jacks. But how are you switching off your speakers when you listen to headphones? If this box is doing it, you need 8 banana jacks ( 4 for L, R in and 4 for L, R speaker out).

You will need some power resistors to reduce the output by a factor of 10-15 and maintain the tube amp's 4/6/8 ohm load. Headphones directly to a power amp are way loud. What is your headphone impedance 8, 25, 600 ohm etc.

I find cast aluminum is hard to work with, I usually use Hammond 1444 series aluminum chassis or Bud boxes for smaller stuff, although they look blah:

BUD Industries Mini Project Bud Box - 3.25'' x 2.21'' x 1.62'' | CU-3001A (CU3001A) | BUD Industries

You aren't making big holes, just for 1/4" connector and banana jacks so a drill works fine and file it to size. The step bits I use for big holes, like tube sockets.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
what is the title or name of this track ravslanka Music 2 6th October 2009 07:45 PM
Keep track of your papers? jan.didden Everything Else 16 4th October 2006 09:49 AM
am i on the right track?? dawgbite Subwoofers 9 26th April 2006 07:46 AM
is my new design on the right track? xdissent Solid State 2 24th November 2003 11:27 PM


New To Site? Need Help?

All times are GMT. The time now is 04:55 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2