diyAudio (
-   Construction Tips (
-   -   Single 18" Bass Bin - Plans & Ideas (

nawtychesco 16th March 2010 09:39 AM

Single 18" Bass Bin - Plans & Ideas
Hi All,

I have been searching the net endlessly for a set of plans.

I run a mobile disco and I have a set of DAS double 15" Bassbins and sometimes it just becomes a pain to carry these around.

So in saying that I am looking for cabinet plans for a single 18" bassbin that will destroy anything. (Im running a RAM Audio 2.0 Amp which is a dream so im not worried about power). The plans also need to be easy to understand.

Any ideas where I could find plans? General Ideas welcome.

Frankie (South Africa):p

dangus 16th March 2010 11:08 AM

Try Speakerplans. Horns will be more efficient, but they also benefit greatly from being used in multiples. And they use more plywood than a simple vented box, so could be heavier.

Take a careful look at bandpass designs. Tune one for a peak at the kickdrum frequency; you may not need any output below 80 Hz.

Tapped horns are simpler to build than normal horns, but they tend to be huge. And designing them isn't a cookbook process yet. However, maybe there's a proven design already that suits your needs.

col 16th March 2010 11:08 AM

The box will depend on the 18" driver you choose/have. A nice easy enclosure is the B&C one but you will need to modify the port length and enclosure volume using something like WinISD (computer program) for it to work properly with your driver.



All times are GMT. The time now is 10:18 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio