I've got a pair of .3 cubic inch sealed box enclosures loaded with 6 1/2" drivers that I'd like to convert to vented. One of the on-line port calculators gave me these numbers for the port dimensions:
port diameter = 1.5" port length = 5.25 tuning frq = 50 hertz
Before I go cutting any holes, do those sound like good numbers to start at?
port diameter = 1.5" port length = 5.25 tuning frq = 50 hertz
Before I go cutting any holes, do those sound like good numbers to start at?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.