|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Construction Tips Construction techniques and tips |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
29th November 2009, 08:03 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2009
|
Grounding for monoblocks using single external supply
Hello all,
For my gainclone project I intend to have two amplifier chassis' with a single shared external supply. I am going to use the PSU layout in the attached image. I am wondering what kind of grounding arrangement I need to use. Do I give PG- and PG+ their own separate wires from the PSU to each amp and run an independent ground cable from the star ground in the PSU chassis to each amplifier chassis'? Some advice here would be great. Thanks, Greg. |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| external power supply, rectifier in or out? | poolorpond | Power Supplies | 26 | 28th November 2011 05:13 PM |
| Single ended transformer grounding question | Captn Dave | Tubes / Valves | 1 | 29th January 2009 05:41 PM |
| Grounding with single tap secondary... | Nordic | Tubes / Valves | 1 | 13th May 2008 02:42 PM |
| External power supply | audiolace | Parts | 5 | 18th January 2007 02:13 PM |
| Grounding Idea for single opamps | Franz G | Chip Amps | 10 | 28th December 2005 02:29 PM |
| New To Site? | Need Help? |
