Which IRS2092 modules? - Page 7 - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Inactive Vendor Forums > Connexelectronic

Connexelectronic Commercial Vendors large & small hawking their wares

 
 
Thread Tools Search this Thread
Old 8th November 2012, 08:50 PM   #61
Cristi is offline Cristi  Europe
diyAudio Member
 
Join Date: Dec 2008
Location: Dortmund+Shenzhen
Charlie, the modules can be installed on another heatsink or aluminium baseplate, just need to remove the heatsink carefully. there isn't anything to be desoldered, only 6 screws. pay attention to the distance between heatsink and module, use spacers and if possible insulating sheet between board and heatsink. also pay attention to the flatness of the new heatsink, make sure the transistors will make perfect contact, use thermo-conductive paste and don't bend the transistors legs at all, as this can brake them internally and damage the module.
__________________
www.connexelectronic.com complete assembled amplifier and SMPS
 
Old 14th November 2012, 07:12 PM   #62
muxol is offline muxol  France
diyAudio Member
 
Join Date: Feb 2012
Location: Paris, France
Hi,

- Do you have an idea of the date of release of CxD250-HP power supply?

- What will be the difference of quality between the CxD250-HP and the TA3020 v4b ?
 
Old 21st December 2012, 08:49 PM   #63
diyAudio Member
 
Join Date: Mar 2011
Hi Christi. I see on your website you now have SMPS500RxE power supply for CxD250-HP giving all the required voltage supplies. Is this the power supply with the DC protection that eliminates the need for speaker protection?
 
Old 5th September 2013, 05:16 PM   #64
redjr is offline redjr  United States
diyAudio Member
 
Join Date: May 2011
Location: Danbury, CT
Default How do your CxD300 modules sound?

Hi Noah,

Was curious if you ever got these modules from Cristi and built your amplifier yet? If so, can you offer some comments on how they sound? Not sure if you ever tried any of the LJM based design (L15, L20, L25) modules, but if you did, I would be curious for a comparison of the two. Pictures?

My amp building days are on hold for awhile since I've recently relocated and have no finished basement, office, or workshop space yet! Plus I want to put in a media/home theater. Too many projects and not enough space and/or time.

Thx, Rick
__________________
redjr
 
Old 5th September 2013, 09:52 PM   #65
diyAudio Member
 
Join Date: Jul 2004
Location: Mountain View, CA
Hi Rick,

nope; see Cristi is very honest!
__________________
-----------------------------------------
Noah
 

 


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Irs2092 luka Class D 50 15th July 2012 01:48 PM
Irs2092 gxhcdba Class D 11 14th December 2009 10:54 AM
WTB: UCD400 or 180 modules. OR, some SKA Modules Spiritzly Swap Meet 0 27th September 2008 07:08 AM
UcD modules - can the modules work without the input op-amp? beppe61 Class D 8 11th October 2006 07:35 AM


New To Site? Need Help?

All times are GMT. The time now is 05:53 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2