Recommend an Amplifier for twin woofers - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Inactive Vendor Forums > Connexelectronic

Connexelectronic Commercial Vendors large & small hawking their wares

 
 
Thread Tools Search this Thread
Old 7th February 2011, 10:52 PM   #1
ttan98 is offline ttan98  Australia
diyAudio Member
 
Join Date: Apr 2006
Location: Melb
Default Recommend an Amplifier for twin woofers

Christi

I like to build an amplifier which must be able drive my twin woofers connected in parallel to give between 3-4ohms.

I have a power supply which will give me about +/-70Vdc and I need at least 125W into 8 ohms and 250W into 4 ohms. More power output from the amplifier is a bonus.

You have many modules which will fit this criteria, I need the power output to be clean and ability to drive these loads. Please recommend me a few models which I can look at your website and I will decide from there.

Thanks.
 
Old 8th February 2011, 10:41 AM   #2
Cristi is offline Cristi  Europe
diyAudio Member
 
Join Date: Dec 2008
Location: Dortmund+Shenzhen
Starting from the voltage value of the available power power supply, i can only recommend this boards: Connexelectronic
at +-70V the amplifier can deliver about 400-500W on a 4R impedance or at least 200W on 8R. having higher supply voltage will give you a reserve and better dynamic, the amp will be far from clipping at any time if you only need 250W. make sure that you have enough capacitance for the caps from the power supply, using the amplifier for low-frequencies, otherwise the supply voltages will boost beyond the overvoltage threshold and the amp will mute every time when play loud low frequencies. i recommend at least 4700uF per rail for each module when supply them at +-70V.
__________________
www.connexelectronic.com complete assembled amplifier and SMPS
 
Old 8th February 2011, 08:24 PM   #3
ttan98 is offline ttan98  Australia
diyAudio Member
 
Join Date: Apr 2006
Location: Melb
Hi,

Do you have them in stock now incl. instruction sheets or do I have to wait for its availability?
 
Old 8th February 2011, 08:41 PM   #4
glt is offline glt  United States
diyAudio Member
 
Join Date: Oct 2004
Hi Cristi,

Your new amp coupled with the resonant supplies are perfect for subs application. But there is a need of a simple module with summing R+L input, configurable low pass filter and some amount of level control. Any plans for such a module? :-)
__________________
www.hifiduino.wordpress.com
 
Old 8th February 2011, 08:46 PM   #5
ttan98 is offline ttan98  Australia
diyAudio Member
 
Join Date: Apr 2006
Location: Melb
Hi,

Does this module, IRS2092 needs a speaker protector outboard? or Does it has a built-in speaker relay?
 
Old 8th February 2011, 08:51 PM   #6
col is offline col  Australia
diyAudio Member
 
col's Avatar
 
Join Date: Feb 2008
Location: Melbourne, Victoria, Australia
also, the thing I ALWAYS need but no DIY designer bothers with is a clipping light.
__________________
http://www.minirig.org.au
 
Old 9th February 2011, 10:44 AM   #7
Cristi is offline Cristi  Europe
diyAudio Member
 
Join Date: Dec 2008
Location: Dortmund+Shenzhen
Glt, thank you for the suggestion, as i mentioned some months ago, there are so many things that can be done, unfortunately there is no time for everything, and i must filter the ones which are required the most, if there are other requests too, i consider to design it.

The IRS2092 Modular Amplifier has speaker protection relay on board. i know, some of you guys will say that is useless, the ic has silent start, short-circuit protection, etc. but for an amplifier module, not a complete product, there is always good to have one more level of protection, especially when there are modules with different supply voltage requirements, the lowest power one has 100V Vds transistors, and this can be definitely killed if is supplied with +-80V as is required for the 600W one. I already have a customer which bought 6 of these modules, 2 are 150W, 2 are 250W and 2 are 600W for an active filter amplifier. by mistake, it can be easy to connect the 150W module instead of 600W one since they share the same housing. the relay will not connect the speakers in this case.

Col, some of the amplifiers ic's have built-in clipping, such as LME49810 others require an external circuit. i will consider this suggestion as well.
__________________
www.connexelectronic.com complete assembled amplifier and SMPS
 
Old 9th February 2011, 09:00 PM   #8
ttan98 is offline ttan98  Australia
diyAudio Member
 
Join Date: Apr 2006
Location: Melb
Cristi,

You haven't answer my question, is the +/- 70Vdc IRS2092 module in stock and the instruction sheets that go with them?
 
Old 10th February 2011, 01:17 PM   #9
Cristi is offline Cristi  Europe
diyAudio Member
 
Join Date: Dec 2008
Location: Dortmund+Shenzhen
I have the amplifier modules on stock. i can ship them just next week, the shipping company hasn't started work yet, due to Chinese New Year holiday. I will write the manual in the following weeks, as soon as i have some free time for this. till then, i just ask me what is unclear and i will answer.
__________________
www.connexelectronic.com complete assembled amplifier and SMPS
 
Old 11th February 2011, 08:30 AM   #10
ttan98 is offline ttan98  Australia
diyAudio Member
 
Join Date: Apr 2006
Location: Melb
Advise me when the post office reopens after holidays, I will place order then.
 

 


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crowhurst's Twin Coupled Amplifier terrydaniel Tubes / Valves 27 13th October 2010 03:52 AM
Please recommend me an amplifier design. JayH3 Tubes / Valves 47 11th April 2008 08:00 PM
Treat twin woofers as one woofer? Mos Fetish Multi-Way 78 30th March 2007 03:02 AM
have woofers what do you experts recommend nunayafb Subwoofers 0 31st August 2005 06:55 AM


New To Site? Need Help?

All times are GMT. The time now is 08:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2