diyAudio (
-   Connexelectronic (
-   -   Class AB Audio Amplifiers (

Cristi 14th January 2010 04:51 AM

Class AB Audio Amplifiers
Discussions about class AB audio amplifiers from Connexelectronic

julcat 13th February 2010 01:42 AM

Hello Cristi

I'm interested in the 300W LME49810 Audio Amplifier with Heatsink but i have some questions.

How many watts can it ouput in class A??
Does it comes assambled??

Cristi 15th February 2010 10:45 AM

the 300LME49810 module is complete assembled, and is class AB amplifier but can be adjusted to work as a class A amplifier with derrated output power to about 50-100W depending on cooling method. i recommend to use it in class AB, since the sound quality is quite high to not justify the class A operation with the inherent disadvantages.

butch_vlad 25th February 2010 01:17 AM

What is the supply voltage for the 500w amplifier?
can it run of 2x70 v cc?

Cristi 25th February 2010 04:11 AM

to get the full power out of the 500W LME49810 amplifier, each module must be supplied with +-72 to +-76V DC for the power stage and +-75 to +-80V for the driver stage.

marchel 27th February 2010 09:09 AM

About the 500W LME49810,

Can it be configured to run 500W class A/B at 2 ohms? What's the supply voltage needed?


Cristi 27th February 2010 09:16 AM

the supply voltage for 500W at 2 Ohms load impedance should be +-560 to +-60V for the power stage and +-60 to +-67V for the driver stage. if you want to use this SMPS Connexelectronic for the amplifier, can use a single differential voltage for both power stage and driver stage and the output voltage of the smps can be adjusted for +-60V.

butch_vlad 27th February 2010 11:01 AM

"Can provide differential output voltage within +-45 to +-55V range"
From the website.....what is the maximum voltage this smps can give? The increased output capacitors help sustaining the maximum wattage better?

Cristi 6th March 2010 06:22 AM

the A1000SMPS can provide as i mention before +-45 to +-55V without any change. for different output voltage, in range of +-35 to +-70 V one resistor from the feedback loop must be changed. the same transformer can be used for this voltage range.

TCx 23rd May 2010 08:45 AM

I am looking for a hifi amp module. Output power is not much important, sound quality is of highest priority.
Which of these class AB modules would you recommend?
2x100W LM4702 BPL
2x100W LM4702 MOS
2x100W LM4702 SAP15
300W LME49810 Audio Amplifier
AEM6000 Audio Amplifier with heatsink

And if we add the class T or D amps to this comparison, which one(s) would be most recommended?

All times are GMT. The time now is 01:38 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2