Case Face-Plates

Tenson · 21st March 2007, 04:23 PM

Hi,

Does anyone know somewhere in the UK I can get some face-plates made for my pre-amp and amp?

I bought some old IBM network cases and want to simply put an aluminium face plate on the front.

I know one place in the UK that will do it, but they have a 3 week turnaround time minimum which I don't really wanna wait.

Here is the case for the pre-amp (I will cut holes for controls myself)

Here is the design I need. Ideally anodised back, too.

Thanks muchos!

dgoodier · 21st March 2007, 04:41 PM

Here is a german site to try, if you haven't already.
http://www.schaeffer-ag.de/

koolkid731 · 23rd March 2007, 07:09 AM

It's nice to see UK use the metric system. Only USA stays backward with inches and feet.

G · 24th March 2007, 11:55 AM

Quote:

Originally posted by koolkid731
It's nice to see UK use the metric system. Only USA stays backward with inches and feet.

LOL! That not the only thing we are backwards about unfortunately.

Javin5 · 24th March 2007, 11:30 PM

I had two panels made by Schaeffer. Not dirt cheap, but I was very satisfied with the results and will use them again.

Kurt

21st March 2007, 04:23 PM	#1
Tenson diyAudio Member Join Date: Feb 2006 Location: Kent	Case Face-Plates Hi, Does anyone know somewhere in the UK I can get some face-plates made for my pre-amp and amp? I bought some old IBM network cases and want to simply put an aluminium face plate on the front. I know one place in the UK that will do it, but they have a 3 week turnaround time minimum which I don't really wanna wait. Here is the case for the pre-amp (I will cut holes for controls myself) Here is the design I need. Ideally anodised back, too. Thanks muchos!

21st March 2007, 04:41 PM	#2
dgoodier diyAudio Member Join Date: Mar 2006 Location: Maryland	Here is a german site to try Here is a german site to try, if you haven't already. http://www.schaeffer-ag.de/ __________________ dgoodier

23rd March 2007, 07:09 AM	#3
koolkid731 diyAudio Member Join Date: Jan 2005 Location: Sonoma, California	It's nice to see UK use the metric system. Only USA stays backward with inches and feet. __________________ Koolkid

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RS52 w/cutdown face plates	mitchyz250f	Swap Meet	6	7th July 2008 01:44 PM
tweeter face plates	Puggie	Multi-Way	2	22nd June 2005 03:11 PM
Machined Face Plates	drdokman	Parts	40	10th March 2004 12:53 AM
WTB blank rack mount face plates	woody	Swap Meet	5	16th December 2003 09:54 PM
mica plates	Kilowatt	Parts	1	19th November 2001 06:08 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th March 2007, 11:30 PM	#5
Javin5 diyAudio Member Join Date: Mar 2006 Location: Switzerland	I had two panels made by Schaeffer. Not dirt cheap, but I was very satisfied with the results and will use them again. Kurt

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read