Power Supply for Teac A-L700p

newbie23 · 1st February 2007, 08:08 PM

I am looking for a new power supply for the Teac and was wondering what you suggest. I heard the skynet power supplies are awesome so I was thinking maybe one that outputs 24v and 5v would be idea. http://www.skynetusa.com/index.php?p...on=com_phpshop
Would it better just to buy two 8080 skynet modules and wire them in series to get 24v and use the extra 5v let over or just go strict battries? Much help would be appeciated.

dwk123 · 2nd February 2007, 02:13 PM

I'm not an SMPS expert, but I'd think that running two in series would be a much worse choice than a single supply at the target voltage, particularly since they have a 24V/5V unit available. You'd have to generate the 12V for the relays via a resistor or regulator, but that doesn't seem like too big a problem.
I'm not entirely sure how one would determine whether the skynet would be a step up from the existing SMPS or not, though.

I have two Teac units that I'm intending to use batteries on, although I haven't made much progress on them yet. I already have the batteries, and since I'm somewhat interested in 'off grid capable' system, my motivation isn't entirely that I think they'll be better.

1st February 2007, 08:08 PM	#1
newbie23 Banned Join Date: Feb 2007 Location: Indiana	Power Supply for Teac A-L700p I am looking for a new power supply for the Teac and was wondering what you suggest. I heard the skynet power supplies are awesome so I was thinking maybe one that outputs 24v and 5v would be idea. http://www.skynetusa.com/index.php?p...on=com_phpshop Would it better just to buy two 8080 skynet modules and wire them in series to get 24v and use the extra 5v let over or just go strict battries? Much help would be appeciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Teac A-L700P Tripath Digital 3 channel Power-amplifiers - UK	badgerboy	Swap Meet	1	21st October 2006 03:07 PM
Where to get Teac A-L700P???	ws2k	Class D	2	17th October 2006 10:46 PM
How to correctly connect 24vdc battery power to Teac A-L700P??? HELP!!!	Crazy_D	Class D	2	10th October 2005 07:16 PM
Help on Teac A-L700P using battery power	HolyGhostFire20	Power Supplies	1	28th July 2005 03:42 PM
Teac A-l700p mods	HolyGhostFire20	Class D	0	26th July 2005 06:32 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd February 2007, 02:13 PM	#2
dwk123 diyAudio Member Join Date: Feb 2002	I'm not an SMPS expert, but I'd think that running two in series would be a much worse choice than a single supply at the target voltage, particularly since they have a 24V/5V unit available. You'd have to generate the 12V for the relays via a resistor or regulator, but that doesn't seem like too big a problem. I'm not entirely sure how one would determine whether the skynet would be a step up from the existing SMPS or not, though. I have two Teac units that I'm intending to use batteries on, although I haven't made much progress on them yet. I already have the batteries, and since I'm somewhat interested in 'off grid capable' system, my motivation isn't entirely that I think they'll be better.