Hi all,
I have a TI TAS5112 evaluation board on hand.
I am thinking about moding the output filter, the filter looks like this
TAS5112 -> 33nF(smd) to ground -> 10uH /4.4A coil -> 1uF MKS -> zobel (10nF & 1R) to gound -> 10k R to ground -> speaker
I am wondering what is the purpose of the 10k resistor to ground.
I'll prabably just do a direct part replacement.
I have a TI TAS5112 evaluation board on hand.
I am thinking about moding the output filter, the filter looks like this
TAS5112 -> 33nF(smd) to ground -> 10uH /4.4A coil -> 1uF MKS -> zobel (10nF & 1R) to gound -> 10k R to ground -> speaker
I am wondering what is the purpose of the 10k resistor to ground.
I'll prabably just do a direct part replacement.