Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Multi Channel T-Amp Input considerations
Multi Channel T-Amp Input considerations
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 13th November 2006, 09:58 AM   #1
soundcheck is offline soundcheck  Germany
diyAudio Member
Join Date: Mar 2005
Location: DUS
Default Multi Channel T-Amp Input considerations

Hi folks.

I'd like to run my T-Amps to actively drive my open baffle dipole
speakers (highs and mids).
Subwoofers (100Hz crossover) do have there own electronics!

Currently the tweeter is passively crossed over at 8kHz with a 6db filter in front of it. The wideband speaker runs open - no filtering at all. Just filtererd by the natural open baffle rolloff.
Both are running on the same channel.

Seperating them might give some advantages:

I was thinking to change the input caps of the two T-Amp channels to have a

1. Full active Setup - with some kind of bi-wiring in place and beside that getting the same speaker- cable length.
2. To get rid of one cap in the Highs-path, Coupling Input Cap=Crossover Cap
3. To get lower value caps in the mids-path and highs
(small high quality caps would be much faster and cheaper)
4. Bass and mids signals wouldn't have to pass the amps.
5. No further phase shift

Considering a 20k input impedance:

1. Tweeter channel
10nF and 20k input impedance gives me the required filter as passive line filter.

2. Mids channel
100nf would be sufficiant to have the crossover point at ca. 80Hz.

The only disadvantage I see, is the paralleling of both inputs,
which lowers the impdance seen by the DAC. I guess the resullting 10k would still be sufficiant.

I wonder if somebody can confirm above thinking, if this could work. Perhaps somebody tells me if its worth the effort.

Cheers KLS
  Reply With Quote


Multi Channel T-Amp Input considerationsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating 5.1 Multi Channel sound from 2 channel jenkrich Everything Else 5 1st September 2009 07:29 AM
multi channel t amp kendt Class D 2 4th April 2009 11:12 AM
Center channel considerations merlinx76 Multi-Way 56 19th January 2005 06:48 AM
Multi purpose multi channel gainclone PCB: Team project - group buy rick57 Chip Amps 14 29th March 2003 05:54 PM

New To Site? Need Help?

All times are GMT. The time now is 06:50 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio