Do you think amp6 plus toroid will fit into this case?

fcj · 2nd November 2006, 01:52 PM

Hello, Do you think amp6 plus toroid trans. will fit into this case?
Hammond EDDYSTONE 11130PSLA , mm 125 x 125 x 75
Thank´s

xenob · 2nd November 2006, 04:14 PM

if you are a skilled builder it could work.

Amp 6 is 43X100X40m:
a toroid is usually; 120x50

speaker posts and electric cabling might pose a problem.

fcj · 2nd November 2006, 04:21 PM

Ok, thank´s for the info

mark_olson · 2nd November 2006, 08:00 PM

Check out:

http://www.kjxaudio.com/kj1.html

According to his parts list he's used a Hammond 1455T2201 case. You could check the dimensions for that case against the one you've spec'ed and then extrapolate from his pictures whether or not it would work. Personally I think it would be too tight.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TA 10.1 or Amp6 or something else?	aquapiranha	Class D	11	19th February 2009 07:45 PM
Toroid inrush current in case of short blackout	kl	Power Supplies	14	8th December 2008 03:38 PM
need toroid winding wire for amp6	gychang	Parts	4	31st October 2007 06:16 PM
Trade a 40V 400VA Toroid for 20V 300VA Toroid	john65b	Swap Meet	7	10th October 2006 03:49 AM
Noisy Amp6	jwb009	Class D	3	25th May 2006 02:05 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd November 2006, 04:14 PM	#2
xenob diyAudio Member Join Date: Jan 2006 Location: Vienna	if you are a skilled builder it could work. Amp 6 is 43X100X40m: a toroid is usually; 120x50 speaker posts and electric cabling might pose a problem.

2nd November 2006, 04:21 PM	#3
fcj diyAudio Member Join Date: Nov 2005 Location: stgo, chile	Ok, thank´s for the info

2nd November 2006, 08:00 PM	#4
mark_olson diyAudio Member Join Date: Oct 2006	Check out: http://www.kjxaudio.com/kj1.html According to his parts list he's used a Hammond 1455T2201 case. You could check the dimensions for that case against the one you've spec'ed and then extrapolate from his pictures whether or not it would work. Personally I think it would be too tight.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)