diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Class D (http://www.diyaudio.com/forums/class-d/)
-   -   Do you think amp6 plus toroid will fit into this case? (http://www.diyaudio.com/forums/class-d/89520-do-you-think-amp6-plus-toroid-will-fit-into-case.html)

fcj 2nd November 2006 01:52 PM

Do you think amp6 plus toroid will fit into this case?
 
2 Attachment(s)
Hello, Do you think amp6 plus toroid trans. will fit into this case?
Hammond EDDYSTONE 11130PSLA , mm 125 x 125 x 75
Thank´s

xenob 2nd November 2006 04:14 PM

if you are a skilled builder it could work.

Amp 6 is 43X100X40m:
a toroid is usually; 120x50

speaker posts and electric cabling might pose a problem.

fcj 2nd November 2006 04:21 PM

Ok, thank´s for the info

mark_olson 2nd November 2006 08:00 PM

Check out:

http://www.kjxaudio.com/kj1.html

According to his parts list he's used a Hammond 1455T2201 case. You could check the dimensions for that case against the one you've spec'ed and then extrapolate from his pictures whether or not it would work. Personally I think it would be too tight.


All times are GMT. The time now is 07:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2