choke for output inductor

Tekko · 25th May 2006, 05:03 PM

Which of these below would be best for output inductor for the D-Amp ?

http://www.elfa.se/elfa-bin/dyndok....dok=2011473.htm
http://www.elfa.se/elfa-bin/dyndok....dok=2011474.htm
http://www.elfa.se/elfa-bin/dyndok....dok=2011475.htm

Baldin · 25th May 2006, 05:54 PM

Stoc no. 2011474 - Cast filter chokes with iron powder cores freq up to 500 kHz. The one on 25 uH/2.5A might do the job .... but note 2.5A only .... not much!

Stoc no. 2011475 - INDUCTORS DESIGNED FOR NATIONAL’S 50 KHz SIMPLE SWITCHER™ ........ You would need one of the smalest values like the 47 uH/3A ..... but the intend to 50 kHz will not be enough for a good D-Amp, and will probably heat up.

Stoc no. 2011476 - No good as these are ment for 50 Hz/240 V filters

Better still would be to go for vinding one yourself. I have just ordered some T106-2 and T200-2 RF cores from Micrometals, which can be had for a few $ at:
Kits & Parts
You can download a design program from Micrometals
Calculating a filter can be done here

PS. Your links to the coils in this post does not work

Tekko · 25th May 2006, 06:04 PM

Maybe i can use the T106-1(or whatever they are) cores i already have, the ones from the puter ps output filters.

Maybe 15 turns would do.

Hum i tested the proggy, according to that i need 37 turns, if the cores i have are T106-2.

25th May 2006, 05:03 PM	#1
Tekko diyAudio Member Join Date: Jan 2005	choke for output inductor Which of these below would be best for output inductor for the D-Amp ? http://www.elfa.se/elfa-bin/dyndok....dok=2011473.htm http://www.elfa.se/elfa-bin/dyndok....dok=2011474.htm http://www.elfa.se/elfa-bin/dyndok....dok=2011475.htm

25th May 2006, 05:54 PM	#2
Baldin diyAudio Member Join Date: Jan 2005 Location: Copenhagen	Stoc no. 2011474 - Cast filter chokes with iron powder cores freq up to 500 kHz. The one on 25 uH/2.5A might do the job .... but note 2.5A only .... not much! Stoc no. 2011475 - INDUCTORS DESIGNED FOR NATIONAL’S 50 KHz SIMPLE SWITCHER™ ........ You would need one of the smalest values like the 47 uH/3A ..... but the intend to 50 kHz will not be enough for a good D-Amp, and will probably heat up. Stoc no. 2011476 - No good as these are ment for 50 Hz/240 V filters Better still would be to go for vinding one yourself. I have just ordered some T106-2 and T200-2 RF cores from Micrometals, which can be had for a few $ at: Kits & Parts You can download a design program from Micrometals Calculating a filter can be done here PS. Your links to the coils in this post does not work __________________ Visit www.sensibleaudio.dk or read latest news on Baldin's Blog

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
choke or inductor polarity	milen007	Parts	1	1st December 2008 01:54 AM
Common mode choke as boost inductor	jegandren	Power Supplies	4	7th July 2008 05:43 PM
inductor/choke/air core/ferrite core. . . same thing?	poolorpond	Pass Labs	24	29th March 2008 10:55 PM
Looking for a choke/inductor	cabbagerat	Everything Else	0	19th March 2004 06:37 AM
Source for output air cor output inductor??	sam9	Solid State	7	19th January 2004 02:25 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th May 2006, 06:04 PM	#3
Tekko diyAudio Member Join Date: Jan 2005	Maybe i can use the T106-1(or whatever they are) cores i already have, the ones from the puter ps output filters. Maybe 15 turns would do. Hum i tested the proggy, according to that i need 37 turns, if the cores i have are T106-2.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)