Need class-T with more output

larsth · 19th March 2006, 02:34 PM

I have for a while been using a Super-T and T-amp and really like the way they perform. But I could in some instances use a bit more power.

Anyone with experience with one of the higher-output kits - like the Fenice 100 or 41Hz Amp 1/5 (TA2022) or even the Autocostruire 100m (TAA4100A)?

Puffin · 19th March 2006, 06:40 PM

You must have a very big room. I have modified my amp as per panomaniac's mods on his site. My speakers are 89db sensitive. I use a valve pre-amp and if I turn it up over half way I am deafened. If you haven't modofied it and it is as bought, you must do so. Run it with a 3Amp 13.8 DC power supply which will power the chip to it's limit and get the best out of it.

19th March 2006, 02:34 PM	#1
larsth diyAudio Member Join Date: Jun 2004 Location: denmark	Need class-T with more output I have for a while been using a Super-T and T-amp and really like the way they perform. But I could in some instances use a bit more power. Anyone with experience with one of the higher-output kits - like the Fenice 100 or 41Hz Amp 1/5 (TA2022) or even the Autocostruire 100m (TAA4100A)?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Class D - output LPF	Skeebopstop	Class D	22	26th March 2009 01:29 AM
Class B output power	lt cdr data	Solid State	13	13th July 2006 12:25 PM
Cd Rom digital output for Class D amp	Rog	Digital Source	1	29th January 2004 05:55 AM
CCS for PP Class A output stage?	AudioGeek	Tubes / Valves	5	24th January 2004 03:58 PM
Class A output DAC	PTSOUNDLAB	Digital Source	2	30th April 2003 07:34 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th March 2006, 06:40 PM	#2
Puffin diyAudio Member Join Date: Feb 2006 Location: U.K	You must have a very big room. I have modified my amp as per panomaniac's mods on his site. My speakers are 89db sensitive. I use a valve pre-amp and if I turn it up over half way I am deafened. If you haven't modofied it and it is as bought, you must do so. Run it with a 3Amp 13.8 DC power supply which will power the chip to it's limit and get the best out of it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)