Help with Pan XR45 / DCX2496 configuration - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st July 2005, 02:35 AM   #1
diyAudio Member
 
Join Date: Jan 2002
Location: Puget Sound
Default Help with Pan XR45 / DCX2496 configuration

I'm stumped about how I should configure the XR45 as a 6-channel amp behind a Behringer DCX2496.

The inputs on the amp (not mentioned in the manual) are:
CTR - LS - LF
SUB - RS - RF

As for speaker level outputs, I have left/right front and surround as well as center. But my sixth output is "back".

How do I get a signal into the receiver and routed out "back."

Thanks.
  Reply With Quote
Old 2nd August 2005, 06:22 PM   #2
MartinQ is offline MartinQ  Canada
diyAudio Member
 
Join Date: Jul 2004
Location: Ontario, Canada
The short answer is: You can't.

You can use the XR45 & XR50 as 4-channel amp but not as a 6-channel without modification. They simply did not design it to be used that way.
  Reply With Quote
Old 2nd August 2005, 06:34 PM   #3
diyAudio Member
 
Join Date: Jan 2002
Location: Puget Sound
Yeah, that's what I figured. I misunderstood/misremembered threads I had read in the past about that.

Thanks.
  Reply With Quote
Old 26th November 2005, 09:52 AM   #4
diyAudio Member
 
Join Date: Nov 2002
Location: Sweden
Digging up old post....


I have same set-up (like Newform) XR45 & DCX2496 where the XR45 Front and Surround is used as 4-channel amps, driving 2-way diy speaker with the Behringer XO.

I am now thinking about the possibility to have separate amplification for the woofers which in my case has XO at 100Hz, by means of using CTR or SUB + for example Hypex.

If so, I would use 2 channel sub sum by the DCX and the woofer would run Mono but since XO is quite low it might work. Then, I could use mid and tweeter 2-way and the system would "almost" be three way system.

Anyone has any comment on that idea?

LageB
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does anyone know the name of this configuration? wildswan Solid State 0 9th January 2009 12:25 AM
'Best' Configuration for car sub herulach Subwoofers 5 13th May 2006 04:36 PM
Modding a XR45: adding USB port. antorsae Digital Source 4 1st February 2006 05:21 PM
Panasonic SA-XR10 vs SA-XR45/70 Snoodge Class D 1 16th December 2004 08:17 AM
odd configuration Patrat Multi-Way 0 4th February 2003 04:46 AM


New To Site? Need Help?

All times are GMT. The time now is 10:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2