SI monoblock/bi-amping questions - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th May 2005, 05:13 AM   #1
Reno is offline Reno  United States
diyAudio Member
 
Join Date: Dec 2003
Location: Pacific NW
Default SI monoblock/bi-amping questions

preamble:
I've been using two SI 5066's, one for the woofers left and right, one on the mids&tweeters l&r, with very nice results. Not true biamping, I know, I know.... And besides, running the amps as monoblocks seemed to be a waste of those two unused output channels.

The SI input sections are bypassed, with 3.3uF polypropylene and 20k metal film series resistors jumpered in upstream of the onboard surface mount input caps, 50k resistors from signal to ground at the input rca's.

I've modified my tube preamp to have dual outputs, running the output coupling cap of each side to the junction of two 4.7k resistors to provide some channel isolation. It seems like I lose a little immediacy, a little air or vibrancy or {insert audiospeak here}, so I'd like to remove those resistors from the signal path and go back to single L/R outputs and one set of interconnects.

body:
Last night I changed one of the SI's to mono input, connected one end of two 10k resistors to the input RCA, other ends to the input caps. Now that amp's "left" output powers the mids/tweeter of the left speaker, "right" output powers the left speaker woofer. (Bi-wired, no common grounds).

Can I do away with the 10k resistors without halving the input impedance by running the channels in parallel? How do I compute the input impedance with the 10k's in series before the input cap and 20k gain setting series resistor, and a 50k to gnd at the rca?

I've managed to confuse myself, and I feel I'm in a "borrowing from Peter to pay Paul" situation.

Any ideas much appreciated!

John
  Reply With Quote
Old 7th May 2005, 12:53 AM   #2
diyAudio Member
 
Join Date: Feb 2005
Location: Kingston, NY
This is interesting. I thought about doing the same thing but I was unsure of the wiring. I hope you get this worked out.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
A couple of questions re: bi/tri amping, electronic crossovers EmergencyDpt Multi-Way 17 21st December 2008 09:18 PM
Bi-amping keyser Multi-Way 2 10th February 2005 11:57 AM
VBIGC multi-amping / PGA2310 questions sergiusz Chip Amps 4 4th June 2004 01:25 PM
bi amping felipe_diy Chip Amps 6 24th September 2003 02:05 AM
Bi amping help. CryingDragon Parts 2 25th September 2002 08:17 PM


New To Site? Need Help?

All times are GMT. The time now is 01:06 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2