Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Sonic Impact 5066 Parts List & Modifications
Sonic Impact 5066 Parts List & Modifications
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th May 2007, 01:26 AM   #501
ecl86 is offline ecl86  United States
diyAudio Member
 
Join Date: May 2007
I got a hold of a used Sonic Impact for $20 and about to do some moding. I know that there are lot of moding instruction from this link but it would take me hours of reading to pick up piece and pieces of info. Is there some other link that would provide steps to mod without having to read 50 pages.... Thanks in advance.
  Reply With Quote
Old 30th May 2007, 04:58 AM   #502
bumblebee is offline bumblebee  Philippines
diyAudio Member
 
Join Date: Jul 2005
Location: qc
For the new board:

http://www.diyaudio.com/forums/showt...07#post1210107

For the old one:

http://www.michael.mardis.com/sonic/inputmods.htm
  Reply With Quote
Old 30th May 2007, 05:12 AM   #503
ecl86 is offline ecl86  United States
diyAudio Member
 
Join Date: May 2007
You are the man bumblebee - thank you. By the way what does it mean "jumped" from "removed and jumped" in c4. I do know what remove mean but jump??

http://www.diyaudio.com/forums/attac...amp=1179144873
  Reply With Quote
Old 30th May 2007, 05:40 AM   #504
Pano is offline Pano  United States
diyAudio Moderator
 
Pano's Avatar
 
Join Date: Oct 2004
Location: SW Florida
Sonic Impact 5066 Parts List & Modifications
Quote:
Originally posted by soundphreak
Out of curiosity, how do they build these boards with the tiny components, is it done with robotics, by hand, voodoo or child labor, does anybody know?
Voodoo Zombie Robots, AFAIK. They're faster than you think.


Quote:
Originally posted by ecl86 I do know what remove mean but jump??

As in "bridged by a jumper" or small bit of wire in this instance.
__________________
Take the Speaker Voltage Test!
  Reply With Quote
Old 30th May 2007, 05:55 AM   #505
ecl86 is offline ecl86  United States
diyAudio Member
 
Join Date: May 2007
Do I put a piece of wire in place of the c3 and c4 cap or in between c3 and c4. Thanks.
  Reply With Quote
Old 30th May 2007, 10:55 AM   #506
Davet is offline Davet  United States
diyAudio Member
 
Join Date: Mar 2004
Location: Reston, Virginia (surburb of Wash, DC)
This means to solder a piece of wire to bridge(jump) the connections. This provides connectivity to complete the circuit for devices which have been moved off the board. i.e. a piece of wire has been put in place to bridge the missing device.
__________________
Davet
  Reply With Quote
Old 30th May 2007, 04:08 PM   #507
ecl86 is offline ecl86  United States
diyAudio Member
 
Join Date: May 2007
Got it now. Thanks much Davet.
  Reply With Quote
Old 19th June 2007, 06:54 PM   #508
tuberider is offline tuberider  Northern Marianas
diyAudio Member
 
Join Date: Dec 2004
Location: Earth
Default Nice to have a plug?

Its quiet here, too quiet

On my new T-ampīs plug i got the two red wires at the right side and opposite of the photo and illustrations here?
Should i just go on and isolate the red wires but not together and use the wires as in the plan, starting with the #1 left one(all the white ones)?
Thanks
Aron
  Reply With Quote
Old 21st June 2007, 11:16 AM   #509
Davet is offline Davet  United States
diyAudio Member
 
Join Date: Mar 2004
Location: Reston, Virginia (surburb of Wash, DC)
Default VR Wires

I am not completely following you. I would suggest that you make your connections based on the photos you would find here or on Panomaniac (Michael Mardis) website.

The position of the wires is more important than the color. It would be much easier for us to help you if you could post a photograph.
__________________
Davet
  Reply With Quote
Old 21st June 2007, 12:34 PM   #510
tuberider is offline tuberider  Northern Marianas
diyAudio Member
 
Join Date: Dec 2004
Location: Earth
Default plug wires

Hi and thanks Davet.
I was thinking the same too and wired the plug starting on the left #1 wire. It is working!! Just confusing since my plug wires was oposite and the 2 red wires is the 2 on the right side.

Best
Aron
  Reply With Quote

Reply


Sonic Impact 5066 Parts List & ModificationsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


New To Site? Need Help?

All times are GMT. The time now is 03:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki