Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Rockford Fosgate T30001BD Preamp Problem!
Rockford Fosgate T30001BD Preamp Problem!
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st May 2016, 11:08 AM   #1
MarioRestucci is offline MarioRestucci  Italy
diyAudio Member
 
Join Date: Aug 2012
Location: NAPOLI
Default Rockford Fosgate T30001BD Preamp Problem!

Hello everyone.
I am in possession of an amplifier Rockford Fosgate t30001bd.
He had all the chips TL072 not working, in fact, U100, 101,102,103,104,105,106,107, the pin outputs 1 and 7, was DC voltage.
I changed them all and the situation is much better, in fact, now, on pin 1 and 7 of U107, there is an excellent audio signal, but as soon as the signal passes through C335 and R300 to get to the pin 2 of the U300, the signal distorts, in fact, comes from pin 1 and 7 of U300 with a horrible distortion.
Then the amplification stage, amplifies this horrible audio signal.
all TL072 are new and for this reason are all perfect.
what do you advise me to check?

Last edited by jazbo8; 31st May 2016 at 11:15 AM. Reason: caps
  Reply With Quote
Old 31st May 2016, 11:29 AM   #2
JonSnell Electronic is offline JonSnell Electronic  United Kingdom
diyAudio Member
 
JonSnell Electronic's Avatar
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
Circuit?
__________________
Support for Fender, Marshall and all Valve Equipment; Audio Innovations, Audiorama FU29, Quad and Leak. www.jonsnell.co.uk
  Reply With Quote
Old 31st May 2016, 11:34 AM   #3
MarioRestucci is offline MarioRestucci  Italy
diyAudio Member
 
Join Date: Aug 2012
Location: NAPOLI
Quote:
Originally Posted by JonSnell Electronic View Post
Circuit?
I use the schematic of rockford t20001bd which is almost equal.
Attached Files
File Type: pdf rockford - powerT20001bd.pdf (827.7 KB, 21 views)
  Reply With Quote
Old 31st May 2016, 11:42 AM   #4
as_audio is offline as_audio
diyAudio Member
 
Join Date: May 2008
Have a look at 15 volts regulators R63, R64, R67, R68 etc.
No reason to change the 072s, check supply first.

Last edited by as_audio; 31st May 2016 at 11:49 AM.
  Reply With Quote
Old 31st May 2016, 11:51 AM   #5
MarioRestucci is offline MarioRestucci  Italy
diyAudio Member
 
Join Date: Aug 2012
Location: NAPOLI
Quote:
Originally Posted by as_audio View Post
Have a look at 15 volts regulators R63. R64, R67, R68 etc.
No reason to change the 072s, check supply first.
The power supply works perfectly ...
the voltages +/- 15V, +/- 6v, 10v are there and are fully functional.
Each TL072 is properly supplied with the correct voltage.
Apparently there is no plausible explanation why the sound is distorted in that way when it comes to U300.
  Reply With Quote
Old 31st May 2016, 11:51 AM   #6
JonSnell Electronic is offline JonSnell Electronic  United Kingdom
diyAudio Member
 
JonSnell Electronic's Avatar
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
U300 supply OK? Any DC on pin1 U300?
__________________
Support for Fender, Marshall and all Valve Equipment; Audio Innovations, Audiorama FU29, Quad and Leak. www.jonsnell.co.uk
  Reply With Quote
Old 31st May 2016, 12:29 PM   #7
MarioRestucci is offline MarioRestucci  Italy
diyAudio Member
 
Join Date: Aug 2012
Location: NAPOLI
Quote:
Originally Posted by JonSnell Electronic View Post
U300 supply OK? Any DC on pin1 U300?
Actually I did not check.
but I think it is ok, otherwise, I think it did not go out even distorted sound from pin 1.
rather, I'm thinking that because the pin 1 of U300 is connected to pin 3 of D311 through R303, the problem might just be in the area D311, Q313 and Q312.
I'll try to remove R303 and see what comes out at that time from pin 1 of U300.
WHAT DO YOU THINK?
  Reply With Quote
Old 3rd June 2016, 04:36 PM   #8
MarioRestucci is offline MarioRestucci  Italy
diyAudio Member
 
Join Date: Aug 2012
Location: NAPOLI
good news!
i've replaced C355, c356 and C359.
Their are three electrolytic, C355 and C356 are concerned with filtering the inverting and non-inverting input of U300A, C359 deals with filtering the resulting signal and inject it in the LM6172 comparator that generate the PWM signal and the carrier.
Now the amplifier works fine, but I have a slight problem ...
to the ignition command, there is no delay that enables the driver circuits.
For this reason, there is a violent "bump" in the speaker.
What can I check?
  Reply With Quote

Reply


Rockford Fosgate T30001BD Preamp Problem!Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rockford Fosgate T30001bd RockfordFIx Car Audio 41 29th February 2016 02:30 PM
Rockford Fosgate T30001BD evianamp2011 Car Audio 1 8th May 2015 06:26 PM
ROCKFORD FOSGATE T30001BD josesony68 Car Audio 11 22nd October 2013 01:56 PM
Rockford Fosgate T30001bd ultra Car Audio 63 24th March 2013 03:00 AM
Rockford Fosgate T30001BD mike49504 Car Audio 71 26th March 2010 10:22 AM


New To Site? Need Help?

All times are GMT. The time now is 06:36 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki