I have 3 Behringer Europower PMP 530M on my bench . They all have shorts in them . I did comparison checks between all the major componits , IGBTs & Mosfets BJTs and diodes on all boards. They check fine in circuit. Maybe I need to pull them out compleatly and check them that way. I don't have a schematic and Behringer wont help at all. I think its compleatly stupid that they don't help us techs at all. Any help on these would be thankfull.
To Jon Snell. so far I've checked all componets for shorts . I found a couple of diodes that show a dead short that are associated the power supply. I will pull those next and check them . I also pulled out the final Mosfets or IGBTs and checked them they were fine. As some componets you have to pull out of circuit compleatlly to get an accurate reading.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.