|Class D Switching Power Amplifiers and Power D/A conversion|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|27th May 2015, 05:26 AM||#1|
Join Date: May 2004
Location: Perth WA
Athena P-6000 BASH amp repair
So I have had this Athena P-6000 sub since new and the amp recently has dropped volume to virtually nothing and the auto signal sense also does not work. It still powers up if you switch it to manual on, but still virtually inaudible.
In order the parts I have replaced from reading various threads about this amp:
+/-15v voltage regulators
All amp MOSFETS
Power supply capacitors
I replaced these parts due to various reports I have read hoping for an easy fix, I did not test original parts first. Now I am down to actual fault finding and an hoping for some help.
The fact that the volume is low and no signal sense leads me to believe it may be a fault on the pre-amp board as this is where both these functions are located.
The attached schematic is not this actual amp but is basically the same, component labels are the same.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|BASH Amp Repair Help (From Klipsch Synergy SUB-12)||midnightg35x||Class D||9||22nd February 2015 07:41 AM|
|Any experience with BASH amp (class H) - repair advice||DcibeL||Solid State||2||13th November 2014 04:17 AM|
|Bash Amp Power Supply Repair||crazifunguy||Power Supplies||17||30th September 2014 09:12 PM|
|Celestion 6000 repair...||HVfanatic||Subwoofers||8||23rd July 2011 04:52 AM|
|klipsch bash amp repair||anwaypasible||Everything Else||1||12th September 2007 12:40 PM|
|New To Site?||Need Help?|