Help with diy amp build - diyAudio
Go Back   Home > Forums > Amplifiers > Class D

Class D Switching Power Amplifiers and Power D/A conversion

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th January 2014, 12:43 AM   #1
diyAudio Member
 
Join Date: Jan 2014
Default Help with diy amp build

I'm trying to put together a part list for a project I want to Build. I would like to have two rca inputs with one Bluetooth receiver input as well. My questions have to do with the volume control and a headphone output. I'm very new to this so I want some input before I start buying parts.
1. The amp is a Parts Express #320-303. From what I can tell I will need a headphone amp as well. Am I wrong? I found Parts Express #320-321. I think that will work for headphones but not sure if they can work together. What's your take?

2. Now there is the problem of how to control the volume of two amps with one controller. I found this part on ebay. Digital Stereo Audio Volume Control Combo Kit | eBay.
Can I put this after the input selector (DP3T switch) and before the output selector (DPDT switch to both amps) and control both amps?

I'm not going for super high quality. I just want to play around and see if I can do it. Any help is much appreciated.
  Reply With Quote
Old 25th January 2014, 01:54 AM   #2
DUG is offline DUG  Canada
diyAudio Member
 
Join Date: Jan 2003
Location: mississauga ontario canada
A lot of times a link to ebay does not work...test it before you post.

I personally would have a volume control for each amp...the settings may be very different for each amp and you don't want to blast either your headphones or the neighbors by changing amps on the fly.

Welcome to the forum.

Happy learning.
__________________
Doug We are all learning...we can all help
"You can't stop the signal, Mal. Everything goes somewhere..."
  Reply With Quote
Old 25th January 2014, 03:26 AM   #3
diyAudio Member
 
Join Date: Jan 2014
I noticed the link after I posted but thought it was just me.

So you think I should use two volumes and wire them before the amp but after the output switch?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Entirely DIY Guitar Amp Build Log kuroguy Instruments and Amps 40 22nd March 2014 12:50 AM
Best DIY power-amp/kit to build? WE91 Solid State 31 5th June 2013 09:25 AM
Help me build my first diy amp! PreSapian Solid State 1 24th September 2009 08:01 AM
What diy amp can you build for 500 euro? NurEinTier Class D 12 21st March 2007 01:28 PM


New To Site? Need Help?

All times are GMT. The time now is 11:57 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2